- 1. Re: [Healeys] Stuck water outlet cover, (score: 1)
- Author: "Alan Seigrist" <healey.nut@gmail.com>
- Date: Mon, 15 Sep 2008 20:35:57 +0800
- Can you possibly explain further? Are you talking about the brass water tap on the right side of a 6 cylinder motor, or the water valve that's on top of the heater? If you are talking about the 6 cyl
- /html/healeys/2008-09/msg00321.html (9,169 bytes)
- 2. Re: [Healeys] Stuck water outlet cover, (score: 1)
- Author: "Greg Lemon" <glemon@neb.rr.com>
- Date: Mon, 15 Sep 2008 08:09:41 -0500
- I assumed he was talking about the water outlet on to p of the motor to the radiator. If you have the spare part and the old one is corroded I would sacrifice the old one, I have spent way too many h
- /html/healeys/2008-09/msg00325.html (7,532 bytes)
- 3. Re: [Healeys] Stuck water outlet cover, (score: 1)
- Author: "Alan Seigrist" <healey.nut@gmail.com>
- Date: Mon, 15 Sep 2008 21:28:19 +0800
- Got it! Sorry for my confusion. I'd pull the head and have a machine shop deal with it. I know it's a pain but if you snap off the stud you are going to have to pull the head anyway. Alan '52 A90 '53
- /html/healeys/2008-09/msg00327.html (7,635 bytes)
- 4. Re: [Healeys] Stuck water outlet cover, (score: 1)
- Author: Philip Rittenhouse <philritten@aol.com>
- Date: Mon, 15 Sep 2008 14:19:10 -0700
- I had the same problem. It was the gasket that had basically glued the thermo cover to the head. I used a putty knife to wedge into the little space and remove some of the gasket, then rock the cover
- /html/healeys/2008-09/msg00337.html (10,003 bytes)
- 5. Re: [Healeys] Stuck water outlet cover, (score: 1)
- Author: "BJ8Healeys" <sbyers@ec.rr.com>
- Date: Mon, 15 Sep 2008 15:00:03 -0700
- I've found WD-40 and other similar penetrants to be helpful in breaking the bonds between gaskets and metal. Spray around the joint line, wait a while, tap a little on the stuck item, repeat if neces
- /html/healeys/2008-09/msg00341.html (8,941 bytes)
- 6. Re: [Healeys] Stuck water outlet cover, (score: 1)
- Author: "Don " <don@anglesey.us>
- Date: Mon, 15 Sep 2008 18:55:58 -0600
- Instead of propane use MAPP gas in the yellow bottle. It puts out 80% more heat than propane and works wonders over any of the lubricants. Removed many bolts on my 59' John Deere 630 that would have
- /html/healeys/2008-09/msg00346.html (9,416 bytes)
- 7. Re: [Healeys] Stuck water outlet cover, (score: 1)
- Author: "Ed's Shop" <shop@justbrits.com>
- Date: Mon, 15 Sep 2008 20:04:51 -0600
- er Don.... <<Removed many bolts on my 59' John Deere 630 that would have broke He is trying to remove the alum. thermostat cover?!?! Methinks, MAPP would be a poor pick<G>. __________________________
- /html/healeys/2008-09/msg00347.html (8,097 bytes)
- 8. Re: [Healeys] Stuck water outlet cover, (score: 1)
- Author: "Don " <don@anglesey.us>
- Date: Mon, 15 Sep 2008 19:39:33 -0600
- Sorry Ed, I thought he was trying to remove a stud and had previously used propane to no avail. I guess he just needs to whack it off with a Sawzall, a Dremel would take forever. Don --Original Messa
- /html/healeys/2008-09/msg00349.html (8,837 bytes)
- 9. Re: [Healeys] Stuck water outlet cover, (score: 1)
- Author: "Mirek and Gwen Sharp" <m.g.sharp@sympatico.ca>
- Date: Mon, 15 Sep 2008 22:13:02 -0400
- I have nothing to add to the suggestions provided other than I always persevere with the least intrusive methods supplemented with patience. These are not our everyday drivers (anymore), so my thoug
- /html/healeys/2008-09/msg00350.html (8,896 bytes)
- 10. Re: [Healeys] Stuck water outlet cover, (score: 1)
- Author: "Mark LaPierre" <lapierrem@sbcglobal.net>
- Date: Mon, 15 Sep 2008 22:35:59 -0400
- I would suggest the PB blaster soaking for a couple of days then lock 2 nuts onto the stud and try and remove. If that doesn't work then cut through the stuck part of the thermostat housing to get to
- /html/healeys/2008-09/msg00351.html (10,284 bytes)
- 11. Re: [Healeys] Stuck water outlet cover, (score: 1)
- Author: WILLIAM B LAWRENCE <ynotink@msn.com>
- Date: Tue, 16 Sep 2008 02:53:02 +0000
- A fix I've seen described before is to use a short piece of copper tubing, just large enough to fit over the stud, chucked in a drill motor like a hole saw. This will supposedly cut through the rust
- /html/healeys/2008-09/msg00353.html (9,678 bytes)
This search system is powered by
Namazu