- 1. Low Rev's - More Information. (score: 1)
- Author: "Jason Gray" <jcagray@hotmail.com>
- Date: Mon, 02 Oct 2006 07:22:42 -0700
- I'm having email challenges as I did send an update to the list with more info, but I notice the email didn't hit the list. Anyway I'll try again and here is more data that may provide clarity. It i
- /html/healeys/2006-10/msg00038.html (7,528 bytes)
- 2. Re: Low Rev's - More Information. (score: 1)
- Author: "David Crawford" <dcrawfor@san.rr.com>
- Date: Mon, 2 Oct 2006 09:00:19 -0700
- I am an overdrive dummy, but it sounds to me as though your BN4 is shifting into overdrive either 3rd or 4th on its own. Have you manually flipped the OD switch from off to on when the revs suddenly
- /html/healeys/2006-10/msg00041.html (8,725 bytes)
- 3. Re: Low Rev's - More Information. (score: 1)
- Author: "Greg Lemon" <glemon@neb.rr.com>
- Date: Mon, 2 Oct 2006 11:42:46 -0500
- I don't know if the problem would be as pronounced as you describe it, but I had the vacuum advance go out on me once, and it lost power under load, the rubber diaphragm insiade the adavance is proba
- /html/healeys/2006-10/msg00043.html (7,096 bytes)
- 4. Re: Low Rev's - More Information. (score: 1)
- Author: "Rich C" <richchrysler@quickclic.net>
- Date: Mon, 2 Oct 2006 12:46:56 -0400
- For all logical reasons the only way revs can drop yet a given speed is still maintained is that o/d must be somehow engaging in the other gears. That would mean the switch locking the o/d circuit f
- /html/healeys/2006-10/msg00044.html (8,554 bytes)
- 5. Re: Low Rev's - More Information. (score: 1)
- Author: Dave & M <rusd@velocitus.net>
- Date: Mon, 02 Oct 2006 11:52:41 -0600
- From published information: The OD can self apply without the normal solenoid & valve operation if the tiny bleed hole in the side of the operating valve spindle gets blocked. Near the right front of
- /html/healeys/2006-10/msg00047.html (7,700 bytes)
This search system is powered by
Namazu