fot
[Top] [All Lists]

Re: Early High Port Heads & Figure 8's

To: BFEKENG@aol.com, Fot@autox.team.net
Subject: Re: Early High Port Heads & Figure 8's
From: WEmery7451@aol.com
Date: Tue, 7 Mar 2000 21:10:44 EST
In a message dated 3/6/00 9:53:57 PM Pacific Standard Time, BFE KEN G writes:

<< Our solution was to grind away the offending part of the bottom of
 the head extension & the matching part of the water pump housing until we had
 approx. .025" clearance which we checked with a feeler gauge & a flashlight. 
>>

I did the same type of grinding, Ken; but I forgot to mention it.

<Prev in Thread] Current Thread [Next in Thread>