fot
[Top] [All Lists]

Re: TR Related, Final Project, Exhaust Headers

To: WEmery7451@aol.com
Subject: Re: TR Related, Final Project, Exhaust Headers
From: "Joe Boruch" <jaboruch@netzero.net>
Date: Fri, 3 Dec 2004 05:47:35 GMT
The header collector article that I noted in an earlier posting is from Car 
Craft at http://www.carcraft.com/techarticles/0304_merg/.  Joe(B)

-- WEmery7451@aol.com wrote:
I finally managed (with a little grinding) to run 2 1/2 inch flexible exhaust 
tubing through the frame of the TR-3, as outlined in Kas's book.  The dB's 
went up from 88 to 95, but I have some after thoughts.  The four tubes 
terminate 
into one 2 1/2" collector with a bolt on piece that tapers down to two inches 
in diameter.  I cut off the smaller diameter portion of this piece before 
connecting the 2 1/2" exhaust tubing, since I thought that this was an 
additional 
restriction.

Could this tapered piece have something to do with the tuning of the exhaust 
header?  I got into tuned exhausts in the early 60's while still auto crossing 
and hill climbing the car.  This other guy, who traveled with us, had a brand 
new Alpha rated about 30 HP more than my old TR-3.  He could beat my times in 
autocrosses, but then we went to the Lowellville Hill Climb.  Prier to our 
runs, he was telling me that there was something drastically wrong with my car. 
 
It doesn't run very well and burns oil.  I then beat his times in the hill 
climb.

He took his car to Boffo Motors in Beaver Falls and told them that there was 
something wrong with it.  I beat his times in the hill climb.  They told him 
that his Alpha may have more rated power than my TR-3, but he has less 
displacement.  As a result, I probably have more torque for climbing hills.  He 
couldn't accept this explanation.

They also told him that he probably lost power if he took off his stock 
exhaust system and added a straight pipe.  This was supposed to be a tuned 
exhaust 
system.

I have another nearly identical exhaust header I can use.  Someone was going 
to put it on his street TR-3.  He gave the header to me after I told him what 
he had to do to install it. -- pull the transmission, install a TR-4 flywheel, 
and install the shorter starter motor. 


________________________________________________________________
NetZero Gift Certificates
Give the gift of Internet access this holiday season.
http://www.netzero.com/give

<Prev in Thread] Current Thread [Next in Thread>