fot
[Top] [All Lists]

Re: [FOT] Rear Axle Hub

To: "Gary" <vintage.racer@comcast.net>, <fot@autox.team.net>
Subject: Re: [FOT] Rear Axle Hub
From: "Ed Woods" <fogbro1@comcast.net>
Date: Fri, 27 Oct 2006 17:26:57 -0400
And there's no need to press the axle from the hub at all unless you're 
going to replace the GREASE seal or bearing itself. If you have an ole leak, 
it's from the diff. Those seals are in the axle tubes. Remove the six bolts 
behind the backing plate and pull the entire axle and hub to gain access to 
the OIL SEALS.

Ed Woods 



<Prev in Thread] Current Thread [Next in Thread>