Well yeah, that too.
________________________________
From: owner-fot@autox.team.net on behalf of Ed Woods
Sent: Fri 10/27/2006 2:26 PM
To: Gary; fot@autox.team.net
Subject: Re: [FOT] Rear Axle Hub
And there's no need to press the axle from the hub at all unless you're
going to replace the GREASE seal or bearing itself. If you have an ole leak,
it's from the diff. Those seals are in the axle tubes. Remove the six bolts
behind the backing plate and pull the entire axle and hub to gain access to
the OIL SEALS.
Ed Woods
|