This is for my race car that I am getting ready for Jefferson 500.
I had to put in new clutch master (Wilwood 5/8, same as was in car), and new
slave (stock from Roadster factory.
With car running when I try to engage gear I have to push clutch all the way
to floor, works in last half inch, but then the clutch pedal sticks and
won't come back up.
I have bled a lot and don't see any more air bubbles.
Do I need to adjust rods on either cylinder or is it air.
Thanks
Mike
Michael T. Moore, CPA
2007 West 32nd Street
Erie, PA 16508
Phone: 814-868-4831 ext 103
Fax: 814-864-7383
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|