P.S.
Various places sell an adjustable pushrod for the clutch.
If you want to drive down to Cambridge Springs tomorrow I have a spare I'll
let you try.
Bill
1.4 miles south of Campbell's Pottery.
Bill
----- Original Message -----
From: "Mike Moore" <mmoore@wave1.net>
To: "'FOT'" <fot@autox.team.net>
Sent: Thursday, May 09, 2013 8:01 PM
Subject: [Fot] TR4 clutch, help
> This is for my race car that I am getting ready for Jefferson 500.
>
>
>
> I had to put in new clutch master (Wilwood 5/8, same as was in car), and
> new
> slave (stock from Roadster factory.
>
>
>
> With car running when I try to engage gear I have to push clutch all the
> way
> to floor, works in last half inch, but then the clutch pedal sticks and
> won't come back up.
>
>
>
> I have bled a lot and don't see any more air bubbles.
>
>
>
> Do I need to adjust rods on either cylinder or is it air.
>
>
>
> Thanks
>
> Mike
>
>
>
> Michael T. Moore, CPA
>
> 2007 West 32nd Street
>
> Erie, PA 16508
>
>
>
> Phone: 814-868-4831 ext 103
>
> Fax: 814-864-7383
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|