fot
[Top] [All Lists]

Re: [Fot] Caliper Rebuild

To: Michael Moore <mmoore@mtmcpafirm.com>, "fot@autox.team.net" <fot@autox.team.net>
Subject: Re: [Fot] Caliper Rebuild
From: EDWARD BARNARD <edwardbarnard@prodigy.net>
Date: Wed, 27 Aug 2014 05:19:58 -0700
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <473fe206229b4328a64f707a17ca0e1c@BLUPR04MB855.namprd04.prod.outlook.com>
Yes, they can be rebuilt. The "O" rings are available from Moss for a small
amount...pick-up a few. They are a weird, square cross sectional ring. The
reason Moss and the shop manual says they shouldn't be opened is because there
doesn't appear to be any recorded torque for the four bolts. Use good practice
in torqueing these...I don't remember what diameter they are but torque them
to the appropriate spec for that diameter bolt.
-Ed-  


On Wednesday, August
27, 2014 6:18 AM, Michael Moore <mmoore@mtmcpafirm.com> wrote:
  


After my
weekend at Grattan I noticed my Girling caliper was weaping a little
fluid out
of top center.

Can these be rebuilt? Moss says NO in their catalog.

I took
it apart and it is a simple O-ring that needs replaced.



Thanks
Mike

62
TR4, Race car
63 TR4, Street car

Mike & Becky Moore
6050 Ruhl Road
Fairview,
PA 16415

[demime 1.01d removed an attachment of type image/gif which had a
name of image001.gif]
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com/

Donate:
Archive: http://www.team.net/archive
Forums:
http://www.team.net/forums
http://autox.team.net/mailman/options/fot/edwardbarnard@prodigy.net
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>