fot
[Top] [All Lists]

Re: [Fot] Caliper Rebuild

To: Joe Alexander <n197tr4@cs.com>, SCOTT JANZEN <sjanzen@me.com>
Subject: Re: [Fot] Caliper Rebuild
From: Michael Moore <mmoore@mtmcpafirm.com>
Date: Wed, 27 Aug 2014 12:25:13 +0000
Accept-language: en-US
Cc: "fot@autox.team.net" <fot@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <473fe206229b4328a64f707a17ca0e1c@BLUPR04MB855.namprd04.prod.outlook.com> <E4073DB4-E8FF-4B92-8F9C-56309CC006A5@me.com> <C5C15337-1485-4626-9B68-B89A36EC03ED@cs.com>
Thread-index: Ac/B5/6vDZF0BiMcS6Kt1ZZeR+Tu9AABJfoAAABj/IAAAOuL0A==
Thread-topic: [Fot] Caliper Rebuild
Thanks for all the feedback

Thanks
Mike

62 TR4, Race car
63 TR4, Street car

Mike & Becky Moore
6050 Ruhl Road
Fairview, PA 16415
-----Original Message-----
From: Joe Alexander [mailto:n197tr4@cs.com]
Sent: Wednesday, August 27, 2014 7:58 AM
To: SCOTT JANZEN
Cc: Michael Moore; fot@autox.team.net
Subject: Re: [Fot] Caliper Rebuild

Speaking of caliper seals.....

Chris Marx left with us, several sets of his seals for calipers. It was a
special run with a superior material. We are successfully using them in our
car.

We can ship them to you.....you can pay Chris thru PayPal.

Joe Alexander
645 1st Street
Jesup, IA 50648
The-vintage-racer.com
Gasketinnovations.com
Cell:  319.464.4711

> On Aug 27, 2014, at 6:46 AM, SCOTT JANZEN <sjanzen@me.com> wrote:
>
> I rebuild or inspect my calipers (girling 16P) probably twice a
> season. Get stainless steel pistons, and the seal rebuild kits- I've
> been getting them from Team Triumph. The SS pistons will not rust,
> clean up readily with a soft application of scotch brite and brake
> cleaner so they'll last pretty much forever. You are not terribly
> concerned about the condition of the bores, as long as there is no
> rust or scale, as unlike a MC the piston slides on the seal, rather
> than the seal sliding in the bore.  There is no need or point in separating
the caliper halves.
> I got in the habit of regular rebuilds after one particularly hot
> weekend where I loaded my car in the trailer after the last race, and
> unloaded to find a puddle of fluid by the LF wheel. The seal had just
cooked!
>
> Sent from my mobile device
>
>> On Aug 27, 2014, at 7:17 AM, Michael Moore <mmoore@mtmcpafirm.com> wrote:
>>
>> After my weekend at Grattan I noticed my Girling caliper was weaping
>> a
> little
>> fluid out of top center.
>>
>> Can these be rebuilt? Moss says NO in their catalog.
>>
>> I took it apart and it is a simple O-ring that needs replaced.
>>
>>
>>
>> Thanks
>> Mike
>>
>> 62 TR4, Race car
>> 63 TR4, Street car
>>
>> Mike & Becky Moore
>> 6050 Ruhl Road
>> Fairview, PA 16415
>>
>> [demime 1.01d removed an attachment of type image/gif which had a
>> name of
> image001.gif]
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/sjanzen@me.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/n197tr4@cs.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>