healeys
[Top] [All Lists]

Re: Attn: Rally / Works / Replica Detail Needed

To: healey3000bn7@yahoo.com, healeys@autox.team.net
Subject: Re: Attn: Rally / Works / Replica Detail Needed
From: SAINTADUB@aol.com
Date: Thu, 7 Apr 2005 17:09:05 EDT
Hi Carlos,
 
I have no photo on hand but I done what you intend to do, use the aluminum  
gear knob with the switch inside on a side shifter; First,I had to bent a 
little  the shifter to have the knob more "vertical", I have the switch on the 
driver  side, it's easy to use it with the thumb, and for the wire, I have used 
a 
black  shrink tube which hold the wires along the shifter and look not to bad. 
I never  found the heat as a problem.
 
rgds,
 
Philippe
BT7




<Prev in Thread] Current Thread [Next in Thread>