healeys
[Top] [All Lists]

Re: Follow up Question -Front Wheel Alignment

To: John Soderling <jsoderling@astound.net>
Subject: Re: Follow up Question -Front Wheel Alignment
From: Dave & Marlene <rusd@velocitus.net>
Date: Wed, 20 Apr 2005 22:01:05 -0600
Hi John,

Toe in is measured at the tire diameter. To decrease toe in, loosen the
locknuts on both ends of the cross tube & rotate the tube in a direction
that lengthens it.

Dave Russell
BN2

John Soderling wrote:
 > A follow up question: To decrease the toe-in, which direction do I
 > turn the center tie-rod cross-tube?  Looking front the front of the
 > car, do I turn the tube up or down? Thanks. Vrooom vrooom, John
 >
 > ----- Original Message ----- From: John Soderling To: Healey List
 > Sent: Wednesday, April 20, 2005 7:29 PM Subject: Manual Front Wheel
 > Alignment Question
 >
 >
 > I have a question regarding wheel alignment specs. So my question is:
 >  when the Workshop Manual says the toe-in should be 1/16", what is
 > the distance they use between the front and rear measured points?
 > Tire diameter?  Wheel diameter?  Other?
 >
 > Thanks for any help.
 >
 > Vrooom vrooom, John 100-Six  Erika the Red




<Prev in Thread] Current Thread [Next in Thread>