I attached the 3rd brake light I made by using a magnetic material I got from
a sign shop. I shaped the bottom side of the brake light to match the curve of
the trunk lid, then placed the magnetic material on the trunk lid and glued
the brake light to the material. After curing, I trimmed the magnetic material
down flush with the edges of the light. I can attach and remove the brake
light as needed.
David Z.
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|