--===============6631893678727165514==
Content-Transfer-Encoding: 7bit
--Apple-Mail-FA3F8825-099C-42E5-8C29-A746E84903AC
charset=utf-8
Content-Transfer-Encoding: quoted-printable
Okay Bob.
As you wish. However, before I sign off, take the nut off the trunnion and s=
ee the result (jack stand under the spline hub - latest pic).
Just trying to help.
Alan - from my iPad
> On 6 Jan 2021, at 19:25, Bob Spidell <bspidell@comcast.net> wrote:
>=20
> =EF=BB=BF
> It=E2=80=99s a side load on the shock.
> <image0.jpeg>
>=20
>>> On Jan 6, 2021, at 10:38 AM, Bluehealey <bluehealey@gmail.com> wrote:
>>>=20
>> =EF=BB=BFSorry Bob - you=E2=80=99re still not gettin=E2=80=99 it.
>> The important bit is -
>>>> the weight of the car is carried on the spring and bottom wishbone.
>> That is why your jack under the pan lifts the car.
>> Then -=20
>>>> The wheel and stub axle is bearing upwards, LIFTING the car through the=
top trunnion using the kingpin as a pull-rod to the bottom wishbone and spr=
ing.
>> If you wish to test this, remove a wheel and place a jack stand under the=
spline hub to support the car. Now unwind the the top nut of the kingpin a=
few turns and observe the increasing gap at the bottom the kingpin. If you=
undo the nut all the way you will drop the car on the deck.
>>=20
>> Alan - from my iPad
>>=20
>>>> On 6 Jan 2021, at 17:05, Bob Spidell <bspidell@comcast.net> wrote:
>>>>=20
>>> =EF=BB=BF re: "The whole front end is sat on those two Oilite bronze thr=
ust washers."
>>>=20
>>> Nope. Proof: I have placed my cars on jackstands under the rear springs a=
nd front trunnions and R&R'd their shock absorbers several times (Armstrong s=
hocks are a PITA, but that's a different rant). Risky? Maybe, but done right=
the risk is manageable. My BJ8 rode through a Richter 5+ earthquake in this=
state in San Jose a few years ago; obviously, a flat, rugged concrete surfa=
ce is required (note messing with massive springs under compression has risk=
s as well). My BN2 is now in this state while I wait for front shock rebuild=
s (though I have the jackstands backed-up by a QuickJack under the chassis).=
>>>=20
>>> Though there is a very specific gap called-for for the top trunnion, the=
only reason I can see is too small a gap might cause some binding--leading t=
o even more steering effort--and too large could result in the shock and bus=
hing/bearing taking a beating.
>>>=20
>>>=20
>>> On 1/6/2021 7:39 AM, bluehealey@gmail.com wrote:
>>>> Hi Fred.
>>>> You are not the first person that I have encountered with this confusio=
n. It is usually held by those that are very familiar with pre-war cars and b=
eam axles. In those cars the steering/stub axle is captured between fixed to=
p & bottom =E2=80=98ears=E2=80=99 on the end of the beam. The weight of the=
car bears down through the top ear onto the swivel axle. All fairly obvious=
.
>>>> In the case of our cars, with top and bottom wishbones, the weight of t=
he car is carried on the spring and bottom wishbone. The wheel and stub axle=
is bearing upwards, LIFTING the car through the top trunnion using the king=
pin as a pull-rod to the bottom wishbone and spring.
>>>> The whole front end is sat on those two Oilite bronze thrust washers. A=
ny reduction in friction here pays dividends =E2=80=93 especially in a 6-cyl=
inder car with even more weight over the wheels.
>>>> Maybe others can come up with a clearer explanation.
>>>> Cheers.
>>>> AlanB
>>>> <image001.png>
>>>> =20
>>>> From: Fred Wescoe <fredwescoe@gmail.com>=20
>>>> Sent: 06 January 2021 15:14
>>>> To: Bluehealey <bluehealey@gmail.com>
>>>> Cc: Team.net <lawrence.swift@gmail.com>; Ahealey help <healeys@autox.te=
am.net>
>>>> Subject: Re: [Healeys] BN2 Caster Angle
>>>> =20
>>>> Listers,
>>>> =20
>>>> I have looked at these top trunnion bearing kits over the years and con=
sidered installing them. However, I simply cannot get my head wrapped aroun=
d why replacing bearings at the top of the kingpin would reduce the weight o=
f the car and improve steering. It seems to me that all the weight of the c=
ar is pressed against the bottom of the kingpin. To me, it seems replacing t=
he top bearing would have no effect on the steering effort. Can someone exp=
lain in simple language why this kit would work?
>>>> =20
>>>> Thanks, mystified,
>>>> =20
>>>> Fred
>>>> =20
>>>> 66 BJ8
>>>> =20
>>>> On Wed, Jan 6, 2021 at 9:49 AM Bluehealey <bluehealey@gmail.com> wrote:=
>>>> These are the ones.
>>>> https://www.ahspares.co.uk/austin-healey/big-healey/suspension-front/to=
p-trunnion-bearing-kit-pair.aspx
>>>> Well worth doing.
>>>> The other often overlooked source of heavy steering is the Steering Idl=
er. It is rarely lubricated, has no real reservoir for oil, and a poor seal a=
t the bottom. I suggest releasing the ball joints that connect to the drop a=
rm to check it for stiffness. Complete removal of the idler isn=E2=80=99t a d=
ifficult job and is the best way to clean and lubricate.
>>>> The caster is pretty good on these cars (the initial design was good). C=
amber could go from positive to negative to be more compatible with radial t=
yres. Also check and minimise toe-in. This has a radical impact on steering f=
eel when wrong (in either direction).
>>>> If after all that you still have problems, then go for the caster chang=
es you have in mind and tell us about your findings. The Team may learn some=
thing.
>>>> The only other aspect that seems to vary from car to car is bump steer.=
Some can be horrible on fast bumpies and others are on rails. I=E2=80=99ve=
never seen a decent treatise on dealing with this on our Big Healeys.
>>>> Have fun.
>>>> Alan - from my iPad
>>>>=20
>>>>=20
>>>> On 6 Jan 2021, at 13:35, Team.net <lawrence.swift@gmail.com> wrote:
>>>>=20
>>>> =EF=BB=BFWhen I rebuilt the front end on my BT7, I had the trust bearin=
gs at the top of the kingpin replaced with bearings - made a huge difference=
in the ease of steering.
>>>>=20
>>>>=20
>>>> On Jan 5, 2021, at 10:36 AM, Bob Spidell <bspidell@comcast.net> wrote:
>>>> =20
>>>> re: "The other two are factory fixed and too dangerous to play with or m=
aintain...even if Kilmartin makes the parts"
>>>> =20
>>>> How so?
>>>> =20
>>>> On 1/4/2021 9:40 PM, gradea1@charter.net wrote:
>>>> I'm with the philosophy "set the toe and let 'er blow" The 1/16-1/8" to=
e-in is most important for proper tire wear. The other two are factory fixe=
d and too dangerous to play with or maintain...even if Kilmartin makes the p=
arts. Hank
>>>> =20
>>>> =20
>>>> _______________________________________________
>>>> Support Team.Net http://www.team.net/donate.html
>>>> Suggested annual donation $12.75
>>>> =20
>>>> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/ar=
chive
>>>> =20
>>>> Healeys@autox.team.net
>>>> http://autox.team.net/mailman/listinfo/healeys
>>>> =20
>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/lawre=
nce.swift@gmail.com
>>>> =20
>>>>=20
>>>> _______________________________________________
>>>> Support Team.Net http://www.team.net/donate.html
>>>> Suggested annual donation $12.75
>>>>=20
>>>> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/ar=
chive
>>>>=20
>>>> Healeys@autox.team.net
>>>> http://autox.team.net/mailman/listinfo/healeys
>>>>=20
>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/blueh=
ealey@gmail.com
>>>>=20
>>>> _______________________________________________
>>>> Support Team.Net http://www.team.net/donate.html
>>>> Suggested annual donation $12.75
>>>>=20
>>>> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/ar=
chive
>>>>=20
>>>> Healeys@autox.team.net
>>>> http://autox.team.net/mailman/listinfo/healeys
>>>>=20
>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/fredw=
escoe@gmail.com
>>>>=20
>>>>=20
>>>> Virus-free. www.avast.com
>>>>=20
>>>>=20
>>>> _______________________________________________
>>>> Support Team.Net http://www.team.net/donate.html
>>>> Suggested annual donation $12.75
>>>>=20
>>>> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/ar=
chive
>>>>=20
>>>> Healeys@autox.team.net
>>>> http://autox.team.net/mailman/listinfo/healeys
>>>>=20
>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspid=
ell@comcast.net
>>>>=20
>>>=20
>>> _______________________________________________
>>> Support Team.Net http://www.team.net/donate.html
>>> Suggested annual donation $12.75
>>>=20
>>> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/arc=
hive
>>>=20
>>> Healeys@autox.team.net
>>> http://autox.team.net/mailman/listinfo/healeys
>>>=20
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bluehe=
aley@gmail.com
>>>=20
--Apple-Mail-FA3F8825-099C-42E5-8C29-A746E84903AC
charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><head><meta http-equiv=3D"content-type" content=3D"text/html; charset=3D=
utf-8"></head><body dir=3D"auto">Okay Bob.<div>As you wish. However, before I=
sign off, take the nut off the trunnion and see the result (jack stand unde=
r the spline hub - latest pic).</div><div>Just trying to help.<br><br><div d=
ir=3D"ltr">Alan - from my iPad</div><div dir=3D"ltr"><br><blockquote type=3D=
"cite">On 6 Jan 2021, at 19:25, Bob Spidell <bspidell@comcast.net> wro=
te:<br><br></blockquote></div><blockquote type=3D"cite"><div dir=3D"ltr">=EF=
=BB=BF<meta http-equiv=3D"content-type" content=3D"text/html; charset=3Dutf-=
8"><div dir=3D"ltr">It=E2=80=99s a side load on the shock.<div><image0.jp=
eg></div></div><div dir=3D"ltr"><br><blockquote type=3D"cite">On Jan 6, 2=
021, at 10:38 AM, Bluehealey <bluehealey@gmail.com> wrote:<br><br></bl=
ockquote></div><blockquote type=3D"cite"><div dir=3D"ltr">=EF=BB=BF<meta htt=
p-equiv=3D"content-type" content=3D"text/html; charset=3Dutf-8">Sorry Bob - y=
ou=E2=80=99re still not gettin=E2=80=99 it.<div>The important bit is -</div>=
<div><blockquote type=3D"cite"><div dir=3D"ltr"><blockquote type=3D"cite" ci=
te=3D"mid:033d01d6e442$1e630a70$5b291f50$@gmail.com"><div class=3D"WordSecti=
on1"><p class=3D"MsoNormal">the weight of the car is carried on the spring a=
nd bottom wishbone.</p></div></blockquote></div></blockquote>That is why you=
r jack under the pan lifts the car.</div><div>Then - <br><blockquote ty=
pe=3D"cite"><div dir=3D"ltr"><blockquote type=3D"cite" cite=3D"mid:033d01d6e=
442$1e630a70$5b291f50$@gmail.com"><div class=3D"WordSection1"><p class=3D"Ms=
oNormal">The wheel and stub axle is bearing upwards, LIFTING the car through=
the top trunnion using the kingpin as a pull-rod to the bottom wishbone and=
spring.</p></div></blockquote></div></blockquote>If you wish to test this, r=
emove a wheel and place a jack stand under the spline hub to support the car=
. Now unwind the the top nut of the kingpin a few turns and observe th=
e increasing gap at the bottom the kingpin. If you undo the nut all th=
e way you will drop the car on the deck.</div><div><br><div dir=3D"ltr">Alan=
- from my iPad</div><div dir=3D"ltr"><br><blockquote type=3D"cite">On 6 Jan=
2021, at 17:05, Bob Spidell <bspidell@comcast.net> wrote:<br><br></bl=
ockquote></div><blockquote type=3D"cite"><div dir=3D"ltr">=EF=BB=BF
=20
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DUTF-8"=
>
=20
=20
re: "<span style=3D"mso-fareast-language:EN-US">The whole front end is
sat on those two Oilite bronze thrust washers."<br>
<br>
Nope. Proof: I have placed my cars on jackstands under the rear
springs and front trunnions and R&R'd their shock absorbers
several times (Armstrong shocks are a PITA, but that's a different
rant). Risky? Maybe, but done right the risk is manageable. My BJ8
rode through a Richter 5+ earthquake in this state in San Jose a
few years ago; obviously, a flat, rugged concrete surface is
required (note messing with massive springs under compression has
risks as well). My BN2 is now in this state while I wait for front
shock rebuilds (though I have the jackstands backed-up by a
QuickJack under the chassis).<br>
<br>
Though there is a very specific gap called-for for the top
trunnion, the only reason I can see is too small a gap might cause
some binding--leading to even more steering effort--and too large
could result in the shock and bushing/bearing taking a beating.<br>
<br>
</span><br>
<div class=3D"moz-cite-prefix">On 1/6/2021 7:39 AM,
<a class=3D"moz-txt-link-abbreviated" href=3D"mailto:bluehealey@gmail.=
com">bluehealey@gmail.com</a> wrote:<br>
</div>
<blockquote type=3D"cite" cite=3D"mid:033d01d6e442$1e630a70$5b291f50$@gm=
ail.com">
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DUTF-=
8">
<meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered
medium)">
<!--[if !mso]><style>v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
</style><![endif]-->
<style>@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}p.MsoNormal, li.MsoNormal, div.MsoNo=
rmal
{margin:0cm;
font-size:11.0pt;
font-family:"Calibri",sans-serif;}a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}span.EmailStyle18
{mso-style-type:personal-reply;
font-family:"Calibri",sans-serif;
color:windowtext;}.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri",sans-serif;
mso-fareast-language:EN-US;}div.WordSection1
{page:WordSection1;}</style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]-->
<div class=3D"WordSection1">
<p class=3D"MsoNormal"><span style=3D"mso-fareast-language:EN-US">Hi=
Fred.<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span style=3D"mso-fareast-language:EN-US">Yo=
u
are not the first person that I have encountered with this
confusion. It is usually held by those that are very
familiar with pre-war cars and beam axles. In those cars the
steering/stub axle is captured between fixed top &
bottom =E2=80=98ears=E2=80=99 on the end of the beam. The w=
eight of the car
bears down through the top ear onto the swivel axle. All
fairly obvious.<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span style=3D"mso-fareast-language:EN-US">In=
the case of our cars, with top and bottom wishbones, the
weight of the car is carried on the spring and bottom
wishbone. The wheel and stub axle is bearing upwards,
LIFTING the car through the top trunnion using the kingpin
as a pull-rod to the bottom wishbone and spring.<o:p></o:p></spa=
n></p>
<p class=3D"MsoNormal"><span style=3D"mso-fareast-language:EN-US">Th=
e
whole front end is sat on those two Oilite bronze thrust
washers. Any reduction in friction here pays dividends =E2=80=93=
especially in a 6-cylinder car with even more weight over
the wheels.<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span style=3D"mso-fareast-language:EN-US">Ma=
ybe
others can come up with a clearer explanation.<o:p></o:p></span>=
</p>
<p class=3D"MsoNormal"><span style=3D"mso-fareast-language:EN-US">Ch=
eers.<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span style=3D"mso-fareast-language:EN-US">Al=
anB<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span style=3D"mso-fareast-language:EN-US"></=
span></p><div><image001.png></div><span style=3D"mso-fareast-language:=
EN-US"> <o:p></o:p></span><p></p>
<p class=3D"MsoNormal"><span style=3D"mso-fareast-language:EN-US"><o=
:p> </o:p></span></p>
<div style=3D"border:none;border-top:solid #E1E1E1
1.0pt;padding:3.0pt 0cm 0cm 0cm">
<p class=3D"MsoNormal"><b><span lang=3D"EN-US">From:</span></b><sp=
an lang=3D"EN-US"> Fred Wescoe <a class=3D"moz-txt-link-rfc2396E" href=3D"ma=
ilto:fredwescoe@gmail.com"><fredwescoe@gmail.com></a> <br>
<b>Sent:</b> 06 January 2021 15:14<br>
<b>To:</b> Bluehealey <a class=3D"moz-txt-link-rfc2396E" href=3D=
"mailto:bluehealey@gmail.com";><bluehealey@gmail.com></a><br>
<b>Cc:</b> Team.net <a class=3D"moz-txt-link-rfc2396E" href=3D=
"mailto:lawrence.swift@gmail.com";><lawrence.swift@gmail.com></a>;
Ahealey help <a class=3D"moz-txt-link-rfc2396E" href=3D"mailto=
:healeys@autox.team.net"><healeys@autox.team.net></a><br>
<b>Subject:</b> Re: [Healeys] BN2 Caster Angle<o:p></o:p></spa=
n></p>
</div>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<div>
<p class=3D"MsoNormal">Listers,<o:p></o:p></p>
<div>
<p class=3D"MsoNormal"><o:p> </o:p></p>
</div>
<div>
<p class=3D"MsoNormal">I have looked at these top trunnion
bearing kits over the years and considered installing
them. However, I simply cannot get my head wrapped aroun=
d
why replacing bearings at the top of the kingpin would
reduce the weight of the car and improve steering. It
seems to me that all the weight of the car is pressed
against the bottom of the kingpin. To me, it seems
replacing the top bearing would have no effect on the
steering effort. Can someone explain in simple language
why this kit would work?<o:p></o:p></p>
</div>
<div>
<p class=3D"MsoNormal"><o:p> </o:p></p>
</div>
<div>
<p class=3D"MsoNormal">Thanks, mystified,<o:p></o:p></p>
</div>
<div>
<p class=3D"MsoNormal"><o:p> </o:p></p>
</div>
<div>
<p class=3D"MsoNormal">Fred<o:p></o:p></p>
</div>
<div>
<p class=3D"MsoNormal"><o:p> </o:p></p>
</div>
<div>
<p class=3D"MsoNormal">66 BJ8<o:p></o:p></p>
</div>
</div>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<div>
<div>
<p class=3D"MsoNormal">On Wed, Jan 6, 2021 at 9:49 AM
Bluehealey <<a href=3D"mailto:bluehealey@gmail.com"; moz-do-=
not-send=3D"true">bluehealey@gmail.com</a>>
wrote:<o:p></o:p></p>
</div>
<blockquote style=3D"border:none;border-left:solid #CCCCCC
1.0pt;padding:0cm 0cm 0cm
6.0pt;margin-left:4.8pt;margin-right:0cm">
<div>
<div>
<div>
<p class=3D"MsoNormal">These are the ones.<o:p></o:p></p>
<div>
<p class=3D"MsoNormal"><a href=3D"https://www.ahspares.c=
o.uk/austin-healey/big-healey/suspension-front/top-trunnion-bearing-kit-pair=
.aspx" target=3D"_blank" moz-do-not-send=3D"true">https://www.ahspares.co.uk=
/austin-healey/big-healey/suspension-front/top-trunnion-bearing-kit-pair.asp=
x</a><o:p></o:p></p>
</div>
<div>
<p class=3D"MsoNormal">Well worth doing.<o:p></o:p></p>
</div>
<div>
<p class=3D"MsoNormal">The other often overlooked
source of heavy steering is the Steering Idler. It
is rarely lubricated, has no real reservoir for
oil, and a poor seal at the bottom. I suggest
releasing the ball joints that connect to the drop
arm to check it for stiffness. Complete removal of
the idler isn=E2=80=99t a difficult job and is the bes=
t
way to clean and lubricate.<o:p></o:p></p>
</div>
<div>
<p class=3D"MsoNormal">The caster is pretty good on
these cars (the initial design was good). Camber
could go from positive to negative to be more
compatible with radial tyres. Also check and
minimise toe-in. This has a radical impact on
steering feel when wrong (in either direction).<o:p></=
o:p></p>
</div>
<div>
<p class=3D"MsoNormal">If after all that you still
have problems, then go for the caster changes you
have in mind and tell us about your findings. The
Team may learn something.<o:p></o:p></p>
</div>
<div>
<p class=3D"MsoNormal">The only other aspect that
seems to vary from car to car is bump steer. Some
can be horrible on fast bumpies and others are on
rails. I=E2=80=99ve never seen a decent treatise=
on
dealing with this on our Big Healeys.<br>
Have fun.<o:p></o:p></p>
<div>
<p class=3D"MsoNormal">Alan - from my iPad<o:p></o:p><=
/p>
</div>
<div>
<p class=3D"MsoNormal"><br>
<br>
<o:p></o:p></p>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:5.=
0pt">
<p class=3D"MsoNormal" style=3D"margin-bottom:12.0pt=
">On 6 Jan 2021, at
13:35, Team.net <<a href=3D"mailto:lawrence.swi=
ft@gmail.com" target=3D"_blank" moz-do-not-send=3D"true">lawrence.swift@gmai=
l.com</a>>
wrote:<o:p></o:p></p>
</blockquote>
</div>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:5.0p=
t">
<div>
<p class=3D"MsoNormal">=EF=BB=BFWhen I rebuilt the f=
ront
end on my BT7, I had the trust bearings at the
top of the kingpin replaced with bearings -
made a huge difference in the ease of
steering.<br>
<br>
<br>
<o:p></o:p></p>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal">On Jan 5, 2021, at 10:36
AM, Bob Spidell <<a href=3D"mailto:bspidell@c=
omcast.net" target=3D"_blank" moz-do-not-send=3D"true">bspidell@comcast.net<=
/a>>
wrote:<o:p></o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal"><o:p> </o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal">re: "The other two are
factory fixed and too dangerous to play with
or maintain...even if Kilmartin makes the
parts"<o:p></o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal"><o:p> </o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal">How so?<o:p></o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal"><o:p> </o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal">On 1/4/2021 9:40 PM, <a hre=
f=3D"mailto:gradea1@charter.net"; target=3D"_blank" moz-do-not-send=3D"true">=
gradea1@charter.net</a>
wrote:<o:p></o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<blockquote style=3D"margin-top:5.0pt;margin-botto=
m:5.0pt">
<p class=3D"MsoNormal">I'm with the philosophy
"set the toe and let 'er blow" The
1/16-1/8" toe-in is most important for
proper tire wear. The other two are
factory fixed and too dangerous to play
with or maintain...even if Kilmartin makes
the parts. Hank<o:p></o:p></p>
</blockquote>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<blockquote style=3D"margin-top:5.0pt;margin-botto=
m:5.0pt">
<p class=3D"MsoNormal"><o:p> </o:p></p>
</blockquote>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal"><o:p> </o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal">___________________________=
____________________<o:p></o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal">Support Team.Net <a href=3D=
"http://www.team.net/donate.html"; target=3D"_blank" moz-do-not-send=3D"true"=
>http://www.team.net/donate.html</a><o:p></o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal">Suggested annual donation
$12.75<o:p></o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal"><o:p> </o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal">Archive: <a href=3D"http://=
www.team.net/pipermail/healeys" target=3D"_blank" moz-do-not-send=3D"true">h=
ttp://www.team.net/pipermail/healeys</a>
<a href=3D"http://autox.team.net/archive"; target=
=3D"_blank" moz-do-not-send=3D"true">http://autox.team.net/archive</a><o:p><=
/o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal"><o:p> </o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal"><a href=3D"mailto:Healeys@a=
utox.team.net" target=3D"_blank" moz-do-not-send=3D"true">Healeys@autox.team=
.net</a><o:p></o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal"><a href=3D"http://autox.tea=
m.net/mailman/listinfo/healeys" target=3D"_blank" moz-do-not-send=3D"true">h=
ttp://autox.team.net/mailman/listinfo/healeys</a><o:p></o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal"><o:p> </o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal">Unsubscribe/Manage: <a href=
=3D"http://autox.team.net/mailman/options/healeys/lawrence.swift@gmail.com"; t=
arget=3D"_blank" moz-do-not-send=3D"true">http://autox.team.net/mailman/opti=
ons/healeys/lawrence.swift@gmail.com</a><o:p></o:p></p>
</blockquote>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:=
5.0pt">
<p class=3D"MsoNormal"><o:p> </o:p></p>
</blockquote>
<p class=3D"MsoNormal" style=3D"margin-bottom:12.0pt=
"><br>
_______________________________________________<br>
Support Team.Net <a href=3D"http://www.team.net/do=
nate.html" target=3D"_blank" moz-do-not-send=3D"true">http://www.team.net/do=
nate.html</a><br>
Suggested annual donation $12.75<br>
<br>
Archive: <a href=3D"http://www.team.net/pipermail/=
healeys" target=3D"_blank" moz-do-not-send=3D"true">http://www.team.net/pipe=
rmail/healeys</a>
<a href=3D"http://autox.team.net/archive"; target=3D=
"_blank" moz-do-not-send=3D"true">http://autox.team.net/archive</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net"; target=3D=
"_blank" moz-do-not-send=3D"true">Healeys@autox.team.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/=
healeys" target=3D"_blank" moz-do-not-send=3D"true">http://autox.team.net/ma=
ilman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a href=3D"http://autox.team.n=
et/mailman/options/healeys/bluehealey@gmail.com" target=3D"_blank" moz-do-no=
t-send=3D"true">http://autox.team.net/mailman/options/healeys/bluehealey@gma=
il.com</a><o:p></o:p></p>
</div>
</blockquote>
</div>
</div>
</div>
</div>
<p class=3D"MsoNormal" style=3D"margin-bottom:12.0pt">__________=
_____________________________________<br>
Support Team.Net <a href=3D"http://www.team.net/donate.html"; t=
arget=3D"_blank" moz-do-not-send=3D"true">http://www.team.net/donate.html</a=
><br>
Suggested annual donation $12.75<br>
<br>
Archive: <a href=3D"http://www.team.net/pipermail/healeys"; tar=
get=3D"_blank" moz-do-not-send=3D"true">http://www.team.net/pipermail/healey=
s</a>
<a href=3D"http://autox.team.net/archive"; target=3D"_blank" mo=
z-do-not-send=3D"true">http://autox.team.net/archive</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net"; target=3D"_blank" mo=
z-do-not-send=3D"true">Healeys@autox.team.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/healeys"; tar=
get=3D"_blank" moz-do-not-send=3D"true">http://autox.team.net/mailman/listin=
fo/healeys</a><br>
<br>
Unsubscribe/Manage: <a href=3D"http://autox.team.net/mailman/o=
ptions/healeys/fredwescoe@gmail.com" target=3D"_blank" moz-do-not-send=3D"tr=
ue">http://autox.team.net/mailman/options/healeys/fredwescoe@gmail.com</a><o=
:p></o:p></p>
</blockquote>
</div>
</div>
<div id=3D"DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2"><br>
<table style=3D"border-top: 1px solid #D3D4DE;">
<tbody>
<tr>
<td style=3D"width: 55px; padding-top: 13px;"><a href=3D"https=
://www.avast.com/sig-email?utm_medium=3Demail&utm_source=3Dlink&utm_=
campaign=3Dsig-email&utm_content=3Demailclient" target=3D"_blank" moz-do=
-not-send=3D"true"><img src=3D"https://ipmcdn.avast.com/images/icons/icon-en=
velope-tick-round-orange-animated-no-repeat-v1.gif" alt=3D"" style=3D"width:=
46px; height: 29px;" moz-do-not-send=3D"true" width=3D"46" height=3D"29" da=
ta-unique-identifier=3D""></a></td>
<td style=3D"width: 470px; padding-top: 12px; color:
#41424e; font-size: 13px; font-family: Arial, Helvetica,
sans-serif; line-height: 18px;">Virus-free. <a href=3D"https=
://www.avast.com/sig-email?utm_medium=3Demail&utm_source=3Dlink&utm_=
campaign=3Dsig-email&utm_content=3Demailclient" target=3D"_blank" style=3D=
"color: #4453ea;" moz-do-not-send=3D"true">www.avast.com</a> </td>
</tr>
</tbody>
</table>
<a href=3D"#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2" width=3D"1" height=
=3D"1" moz-do-not-send=3D"true"> </a></div>
<br>
<fieldset class=3D"mimeAttachmentHeader"></fieldset>
<pre class=3D"moz-quote-pre" wrap=3D"">_______________________________=
________________
net/donate.html">http://www.team.net/donate.html</a>
Archive: <a class=3D"moz-txt-link-freetext" href=3D"http://www.team.net/pipe=
rmail/healeys">http://www.team.net/pipermail/healeys</a> <a class=3D"moz-txt=
-link-freetext" href=3D"http://autox.team.net/archive";>http://autox.team.net=
/archive</a>
<a class=3D"moz-txt-link-abbreviated" href=3D"mailto:Healeys@autox.team.net"=
>Healeys@autox.team.net</a>
<a class=3D"moz-txt-link-freetext" href=3D"http://autox.team.net/mailman/lis=
tinfo/healeys">http://autox.team.net/mailman/listinfo/healeys</a>
team.net/mailman/options/healeys/bspidell@comcast.net">http://autox.team.net=
/mailman/options/healeys/bspidell@comcast.net</a>
</pre>
</blockquote>
<br>
=20
<span>_______________________________________________</span><br><span>Suppor=
t Team.Net http://www.team.net/donate.html</span><br><span>Suggested annual d=
onation $12.75</span><br><span></span><br><span>Archive: http://www.te=
am.net/pipermail/healeys http://autox.team.net/archive</span><br><span></spa=
n><br><span>Healeys@autox.team.net</span><br><span>http://autox.team.net/mai=
lman/listinfo/healeys</span><br><span></span><br><span>Unsubscribe/Manage: h=
ttp://autox.team.net/mailman/options/healeys/bluehealey@gmail.com</span><br>=
<span></span><br></div></blockquote></div></div></blockquote></div></blockqu=
ote></div></body></html>=
--Apple-Mail-FA3F8825-099C-42E5-8C29-A746E84903AC--
--===============6631893678727165514==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============6631893678727165514==--
|