mgb-v8
[Top] [All Lists]

RE: Carbs

To: "'Mclean, John R'" <JohnRMclean@eaton.com>, <mgb-v8@autox.team.net>
Subject: RE: Carbs
From: "Larry list account" <list@marketvalue.net>
Date: Thu, 8 Jul 2004 17:27:31 -0600
In-reply-to: <04ED31D9A82E714AB1F6AAEC7C0D19E7EC722F@freohsmb02.napa.ad.etn.com>
Reply-to: "Larry list account" <list@marketvalue.net>
Sender: owner-mgb-v8@autox.team.net
Thread-index: AcRkKg4HzHHldxp1R06poMPAbp0tOgA0B7RwAADAtsAAAO+ggAABgUvAAA7rcxA=
 The 500cfm number seems to be the winner.  I've received several messages
on and off the list that recommend the 500cfm carb.

Thanks to all that responded.

Larry Hoy

> -----Original Message-----
> From: Mclean, John R [mailto:JohnRMclean@Eaton.com] 
> Sent: Thursday, July 08, 2004 10:17 AM
> To: Larry list account; mgb-v8@autox.team.net
> Subject: RE: Carbs
> 
> I think you have it about right. I have a 350 Chevy, 400 HP 
> and originally had a 650 Holley which was way too much fuel 
> and hard to tune. I went to the Edelbrock 500 and it bolt 
> right on and started right up. They need little if any tuning 
> and run just right for me. I don't think you need much over 
> 500 unless you are going to be on the motor big time all the time. 

///
///  mgb-v8@autox.team.net mailing list
///  Send admin requests to majordomo@autox.team.net
///  Send list postings to mgb-v8@autox.team.net
///  Edit your replies!  If they include this trailer, they will NOT be sent.
///


<Prev in Thread] Current Thread [Next in Thread>