On Mon, 19 Apr 1999 REwald9535@aol.com wrote:
> Karl,
> A crows foot wrench is an open end, box, or flarenut wrench that rather than
> having a handle has a broach for a socket drive (usually 3/8, but could be
> 1/4 or 1/2). This allows you to get into some very tight place that a wrench
> won't fit and by using the correct extension and a ratchet handle be able to
> undo a bolt that you would swear the car maker started the assembly of the
> car with and then built the rest of the car around this bolt. <G>
> Depending on the application these may be a little hard to find.
> Hope this helps clear the fog.
> Rick Ewald
*****Sears sells them as well AutoZone and JC Whitney. One part on the
MGB that really needs a crowsfoot wrench is the clutch slave cylinder
nut.
...Art
> >
> In a message dated 4/19/99 10:34:56 PM SA Eastern Standard Time,
> karl.shultz@ibm.net writes:
>
> > "Crow's Foot Wrench" or something like that.
> >
> > What are they?
>
>
|