mgs
[Top] [All Lists]

Re: Screw Extractor

To: mrazor@kih.net, mgs@autox.team.net
Subject: Re: Screw Extractor
From: JustBrits@aol.com
Date: Tue, 8 Jun 1999 20:41:16 EDT
In a message dated 6/8/99 7:38:41 PM Central Daylight Time, mrazor@kih.net 
writes:

<< Who can tell me how these things work.  I have a bleeder valve
 sheared off flush with the side of the caliper.  There is a
 hole in the middle that the #2 extractor fits in.  There is a
 picture of a drill on the box set of extractors.
 1. Which way do I turn the drill (forward) (backward)
 2. How much pressure
 3. Am I suppose to chew the screw out or bite into it and back
 it out
 HELP!
 MIKE R
  >>

Mike:

   In your case, take the thing off and take to machine shop.

Cheers..........

           Ed

<Prev in Thread] Current Thread [Next in Thread>