mgs
[Top] [All Lists]

Re: MGA Starter switch

To: "Larry Hoy" <larryhoy@prodigy.net>, "MG list" <mgs@autox.team.net>
Subject: Re: MGA Starter switch
From: "Larry Hoy" <larryhoy@prodigy.net>
Date: Mon, 8 Jan 2001 20:34:00 -0400
Larry,

Before you rush out and buy a replacement starter cable maybe you should try
the one on my MGA.  The pin on mine also goes almost all of the way in and I
think that is normal.  If you're not concerned about originality you could
install a starter button in place of the pull cable.  I don't think it's
easy to take the switch apart and fix it eventhough it's really simple.

Al
----- Original Message -----
From: "Larry Hoy" <larryhoy@prodigy.net>
To: "MG list" <mgs@autox.team.net>
Sent: Monday, January 08, 2001 12:09 AM
Subject: MGA Starter switch


> Hi all, I'm wondering about the operation of the MGA starter switch.  My
switch seems to need a pretty good tug to crank the engine.
> When pushing the pin on the switch manually it goes almost all the way in
the housing, then you have to push *hard*.  I do need a
> new cable but this doesn't seem to be the issue.  If I were to guess, I'd
say the contacts within the switch are pitted or corroded,
> that's why it requires a good tug to make contact.
>
> Is there a method to fix/inspect/repair these switches?
>
> Larry Hoy


If this message appears brief, you should know it was written and sent using my 
Palm V personal digital assistant which by it's nature does not lend itself to 
long missals

Larry
Sent with an Unregistered version of MultiMail PRO http://www.actualsoft.com

<Prev in Thread] Current Thread [Next in Thread>