Did it EVER work in the current vehicle? If not, it could still be an
electrical problem. I don't think the oil would have anything to do with it
(since I use 30wt), or the temperature (mine works hot or cold).
on 6/5/01 3:05 PM, Andrew B. Lundgren at lundgren@byu.net wrote:
> I haven't noticed it this year, but I haven't been able to drive much, my
> windshield is off right now, but last year, when it was hot out and when the
> car was hot, the OD would not engage. I let off the gas flipped the switch,
> gave it gas, but still not OD. I had the entire thing rebuilt before I
> installed it last year. (less than 1000 mils on it I would say) and when I
> drove the parts car I took it from, it was always cold and always worked.
>
> I thought maybe oil, I was running straight 30wt. I switched to 20w50, but no
> difference...
>
> On Tue, 5 Jun 2001, Charley & Peggy Robinson wrote:
>
>> Hi Andrew,
>>
>> What makes you think the solenoid might be defective? Maybe I can
>> help, BTDT.
>>
>> Cheers,
>>
>> CR
>>
>> "Andrew B. Lundgren" wrote:
>>>
>>> So did you wire it to tell you when the overdrive is really engaged, or just
>>> when the switch is flipped. I have some converns about my solenoid being
>>> defective and would like to monitor it closely...
>
--
Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the red one with the silver bootlid.
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|