mgs
[Top] [All Lists]

Re: Front suspension rebuild options

To: "james" <jhn3@uakron.edu>, "Chuck Renner" <crenner@dynalivery.com>,
Subject: Re: Front suspension rebuild options
From: "Bill Meyer" <wcameyer@msn.com>
Date: Thu, 13 Mar 2003 09:21:45 -0700
Why should it be necessary to torque the V8's at ride height?  Won't the
steel sleeve rotate on the bolt?

Bill


> is that the V8 style have to be pressed in, while the polys could be
> installed with a little hand pressure.  The polys are two pieces so one
half
> is pushed in from each side.  Both should be toruqued at ride height, but
> the polys won't twist so it shouldn't matter for them.

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>