spridgets
[Top] [All Lists]

Re: Fw: Diffs.

Subject: Re: Fw: Diffs.
From: "Angela Hervey-Tennyson & Peter Westcott" <toobmany@bigpond.com>
Date: Mon, 26 Apr 1999 23:06:19 +1000
Cc: <spridgets@autox.team.net>
Reply-to: "Angela Hervey-Tennyson & Peter Westcott" <toobmany@bigpond.com>
Sender: owner-spridgets@autox.team.net
True - but try reshimming the spider gears and while you're at it replace
the shaft and lock pin.

Peter Westcott

----------
From: Paul A Asgeirsson <pasgeirsson@juno.com>
To: Guy@weller-lakes.freeserve.co.uk
Cc: spridgets@autox.team.net
Subject: Re: Fw: Diffs.
Date: Monday, 26 April 1999 8:17

On Sun, 25 Apr 1999 18:59:01 +0100 "Guy"
<Guy@weller-lakes.freeserve.co.uk> writes:
>
>Oh, Great List Knowledge,
>
>The diff on my 1500 has a fair amount of backlash, and this talk of 
>broken
>halfshafts is beginning to get to me.  I have had one break before.
>If worn diffs add to the risk .....
>Anyway, what sort of a job is it to rebuild a diff unit, or can I at 
>least
>reduce the backlash with shims ?
>
>Guy

 Hi All.

The issue of excessive backlash on the pinion gear is something that
really can't be altered without a NEW ring gear and pinion. Assuming
there is no more than marginally excessive noise from the dif assembly,
the backlash you got is what you are stuck with.  Any attempt at changing
it will result in change of heel, toe, flank and face contact on the ring
gear resulting in horrible changes of sound levels from the rear end. 
The correct amount of back lash is etched on the side of the ring gear
near the outer perimeter.  This is for a new one, not one with 35 years
of use on it.  So enjoy the ride and don't fuss about the backlash very
much.

Paul

PAsgeirsson@juno.com


<Prev in Thread] Current Thread [Next in Thread>