spridgets
[Top] [All Lists]

Re: Dark Forces!

To: <spridgets@autox.team.net>
Subject: Re: Dark Forces!
Date: Sun, 19 Nov 2000 08:43:15 -0000
References: <000901c0509b$6fbec4a0$cbed883e@guy> <3A15FAD8.E0AAB39F@syix.com> <002001c05162$fce84820$0c30883e@guy> <3A174072.D796B2F3@flash.net>
hey Bruce,
what a Quacking good idea!
Duck tape.
Tied with cat gut of course.
Here, puss, puss!
Guy
----- Original Message -----
From "Bruce Lowry" <egnorant at flash.net>
To: "Guy Weller" <guy@weller-lakes.greatxscape.net>
Cc: "DuhCaddyhm" <wadleigh@syix.com>; <spridgets@autox.team.net>
Sent: 19 November 2000 02:52
Subject: Re: Dark Forces!


> Duct tape!!  On the end of a pencil,coat hanger, plier handle,
socket
> extension or what ever works. I usually take one piece about 3
inches
> long ang fold it lengthwise with the sticky side out. Wrap it so it
has
> one long sticky wing poking out. Try for the side and use a sideways
> pressure (Just pushing it on sometimes is NOT the way!) Lay it on
and
> roll it on the object until it sticks and carefully attempt to
remove.
> Sometimes a second piece of tape is nessesary as it adheres to oil,
> grease, dirt,cat hair or whatever. No more than one beer before
trying.
> A bit of Zen can't hurt. I have used this method several times and
only
> had one complete failure because I got impatient.
>
> Bruce Lowry
>
>
> Guy Weller wrote:
> >
> > Thanks for the suggesion Sue, a very good idea.
> > Only problem is I havn't yet come across a magnet that picks up
nylon
> > !!
> > Good try !! {:-)
> >
> > Guy
> > ----- Original Message -----
> > From: "DuhCaddyhm" <wadleigh@syix.com>
> > To: "Guy Weller" <guy@weller-lakes.greatxscape.net>
> > Cc: <spridgets@autox.team.net>
> > Sent: 18 November 2000 03:43
> > Subject: Re: Dark Forces!
> >
> > > Believe it or not ......
> > >
> > > If you have a very small magnet and can attach a piece of
> > > string/wire/something to it, you can drop it through the hole,
push
> > it
> > > around a bit and it will finally "find" your missing gem.  With
a
> > little
> > > luck (Prince of Darkness must  be sleeping to get this), you can
> > drag
> > > the part close to the hole and reach for it with thin tweezers,
> > needle
> > > nosed pliers, or something similar!!!  Have done the same with
other
> > > things!  USUALLY works, but this is Lucas Land, so ????
> > >
> > > Good luck!
> > >
> > > Sue

<Prev in Thread] Current Thread [Next in Thread>