[Top] [All Lists]

Re: panhard rod

To: "Gerard" <pixelsmith@gerardsgarage.com>, "ALEX VOLK" <TALLA@TELUSPLANET.NET>, <spridgets@autox.team.net>
Subject: Re: panhard rod
Date: Mon, 3 Jun 2002 15:24:02 -0400
References: <v03130317b9215fc7ce0f@[]>
And think hard about where your exhaust is going to run!  I put a Winners'
Circle unit on my '74.  Was able to squeek the exhaust in, but only by cutting
the huge bracket on the drivers side.  Later on I replaced the springs.  Now the
exhaust has to go UNDER everything and looks like poop.  By the way, springs and
bushings did way more than the panhard rod, IMHO.

Geoff Branch
'74 Meejit "Yellow Peril"
'72 Innocenti 1300 Mini
----- Original Message ----- > >I was wondering if anyone out there had any
information on a panhard rod for
> >an early midget with 1/4 eliptic springs.
> >I would like to fabricate (or buy) one but I need to know where & how they
> >on. I know some chevys have them & they bolt to the diff cover.
> >Any help will be MORE than appreciated
> >Alex
> >'61 midget

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets

<Prev in Thread] Current Thread [Next in Thread>