umm.. so yer sayin' that you are going to use rubber hose as hydraulic line?
I don't think that it will hold long if it will hold at all.. but it will
make a neat balloon for a few seconds right before it goes POP and sprays
brake fluid everywhere..
Lester
On Jan 23, 2012, at 10:06 AM, Kirk Hargreaves wrote:
> I have an idea to try and adapt my 948 master cyl to the larger slave cyl.
> . the latter one that has a hose off the back. I know that one of the
> listers brazed a connection which has worked fine for several years.
>
> That would indicate that the 948 master cyl is able to push the latter and
> larger slave cyl.
>
> It seems that I can knurl the end of the metal pipe and put it inside the
> rubber hose and clamp it with hose clamps?
>
> The fit seems to work. . nice tight fit even before applying a couple of
> hose clamps to keep it in place.
>
> Has anyone tried this or am I setting myself up for a roadside disaster?
>
> Kirk
> ------------------------
>
> spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/oldsaabguy@comcast.net
------------------------
spridgets@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation: $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|