--===============7621328609435292496==
--000000000000bac00005a3acee72
Content-Transfer-Encoding: quoted-printable
Just finished adding brake/tail light with 60 LEDs to the Bugeye. Looks
great in daylight.
Paul Van Wig
Big Bear/Lakewood, CA
On Sun, Apr 19, 2020 at 2:26 PM David Woerpel via Spridgets <
spridgets@autox.team.net> wrote:
> Hi all, Good to hear from you folks! Enjoyed the videos Linda! Rick is
> correct but no, I'm not done with it yet. Had to sort out a bit of play =
in
> the MGA left front wheel. I removed the hub but not the bearings,
> reinstalled and tightened it down past the castellated slot and still had
> had some play. Grabbing the wheel at the top doesn't give me clunking
> sound but shaking it with hands at 9 and 3 positions gives me the slight
> play. I'm starting to suspect inner tie rod at the rack. It's not that b=
ad
> so will keep an eye on it. Would not have noticed it if I hadn't played
> with it to start with. So, NOW on to the Sprite clutch slave remote
> bleeder. Thanks Rick; I'm an old guy and cellophane came from somewhere
> in my brain (lucky anything gets out of there!) Plastic baggie it is.
> Thanks for confirming.
>
> Dave W.
>
> Please stay at home and give our health care workers a break!
>
>
>
> On 4/18/2020 11:06 AM, Linda Grunthaner via Spridgets wrote:
>
> Thanks for the tip Rick.
> Linda
>
> On Sat, Apr 18, 2020 at 10:37 AM Rick Fisk <refisk@chartermi.net> wrote:
>
>> Hi Linda,
>>
>> Yes, the cap has to be vented for normal use. But Dave wanted to know i=
f
>> a piece of plastic bag or similar (not cellophane) under the cap would k=
eep
>> the master from draining while he replaced the line on his slave. Yes, =
it
>> will work Dave. But you're probably all done by now. :-)
>>
>> Rick
>>
>> Sent from my keyboard
>>
>> On Apr 18, 2020, at 10:30 AM, Linda Grunthaner via Spridgets <
>> spridgets@autox.team.net> wrote:
>>
>> =EF=BB=BF
>> Hi Dave,
>> Yes heavy heart every April RIP Frank.
>> I thought the cap needed the hole open to breath and keep the fluid at
>> proper pressure/nopressure on the master cylinder.
>>
>> Will someone please explain?
>> Linda
>> 62 California Sprite "Pinky"
>> (California because Pinky came from LA and so did I)
>>
>> PS found this fun video from 2015, enjoy.
>>
>> https://www.youtube.com/watch?v=3DAzeIVufyRMA
>> https://www.youtube.com/watch?v=3DAX8UEsHZzYo
>>
>>
>> On Mon, Apr 13, 2020 at 5:30 PM David Woerpel via Spridgets <
>> spridgets@autox.team.net> wrote:
>>
>>> Howdy folks,
>>>
>>> Hope all is well with list members, that's you too Mark! Assume people
>>> have been getting a lot of work done on their cars during this period o=
f
>>> "house arrest". I'm finally getting around to installing a remote
>>> clutch bleeder in the Bugeye. Too many joints creaking and complaining
>>> contorting myself into the footwell. Does the cellophane under the M/C
>>> screw top work to prevent all the fluid draining out of the M/C? I
>>> forgot the slave is supplied by a hard line.
>>>
>>> Also, I pause today to remember our friend and mentor, Frank. Still hav=
e
>>> (always will) the WWFD sticker on my car and tool box. By extension we
>>> remember Paul A.; another mentor and guru in his own right. Miss you
>>> guys. You taught us well.
>>>
>>> Stay safe, stay home and work on your cars and the endless Honey Do lis=
t
>>> our wives keep dreaming up. Be well friends.
>>>
>>> "Pay It Forward"
>>>
>>> "It only goes one way"
>>>
>>> Dave W
>>> '59 :{)
>>> '59 MGA 1550
>>> Burlington WI
>>> ------------------------
>>>
>>>
>>>
>
> --
> "Pay if forward" in honor of Frank Clarici III, Spritenut
>
> ------------------------
> spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/pipermail/spridgets http://autox.team.net/a=
rchive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/dwoer=
pel@wi.net
>
> ------------------------
>
> spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/pipermail/spridgets
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/pvanwig@mac.com
>
--000000000000bac00005a3acee72
Content-Transfer-Encoding: quoted-printable
<div dir=3D"ltr">Just finished adding=C2=A0brake/tail light with 60 LEDs to=
the Bugeye. Looks great in daylight.=C2=A0<br clear=3D"all"><div><div dir=
=3D"ltr" class=3D"gmail_signature" data-smartmail=3D"gmail_signature"><div =
dir=3D"ltr"><p style=3D"font-size:12.8px">Paul Van Wig</p><p style=3D"font-=
size:12.8px">Big Bear/Lakewood, CA</p></div></div></div><br></div><br><div =
class=3D"gmail_quote"><div dir=3D"ltr" class=3D"gmail_attr">On Sun, Apr 19,=
2020 at 2:26 PM David Woerpel via Spridgets <<a href=3D"mailto:spridget=
s@autox.team.net">spridgets@autox.team.net</a>> wrote:<br></div><blockqu=
ote class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-left:1px=
solid rgb(204,204,204);padding-left:1ex">
=20
=20
=20
<div>
<p>Hi all, Good to hear from you folks!=C2=A0 Enjoyed the videos Linda!=
=C2=A0
Rick is correct but no, I'm not done with it yet.=C2=A0 Had to so=
rt out
a bit of play in the MGA left front wheel.=C2=A0 I removed the hub bu=
t
not the bearings, reinstalled and tightened it down past the
castellated slot and still had had some play.=C2=A0 Grabbing the whee=
l
at the top doesn't give me clunking sound but shaking it with
hands at 9 and 3 positions gives me the slight play. I'm starting
to suspect inner tie rod at the rack.=C2=A0 It's not that bad so =
will
keep an eye on it. Would not have noticed it if I hadn't played
with it to start with.=C2=A0 So, NOW on to the Sprite clutch slave
remote bleeder.=C2=A0 Thanks Rick;=C2=A0 I'm an old guy and cello=
phane came
from somewhere in my brain (lucky anything gets out of there!)=C2=A0
Plastic baggie it is.=C2=A0 Thanks for confirming.</p>
<p>Dave W.</p>
<p>Please stay at home and give our health care workers a break!</p>
<p><br>
</p>
<p><br>
</p>
<div>On 4/18/2020 11:06 AM, Linda Grunthaner
via Spridgets wrote:<br>
</div>
<blockquote type=3D"cite">
=20
<div dir=3D"ltr">Thanks for the tip Rick.<br>
<div>Linda</div>
</div>
<br>
<div class=3D"gmail_quote">
<div dir=3D"ltr" class=3D"gmail_attr">On Sat, Apr 18, 2020 at 10:37
AM Rick Fisk <<a href=3D"mailto:refisk@chartermi.net"; target=
=3D"_blank">refisk@chartermi.net</a>> wrote:<br>
</div>
<blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex=
;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div dir=3D"auto">Hi Linda,
<div><br>
</div>
<div>Yes, the cap has to be vented for normal use.=C2=A0 But Da=
ve
wanted to know if a piece of plastic bag or similar (not
cellophane) under the cap would keep the master from
draining while he replaced the line on his slave.=C2=A0 Yes, =
it
will work Dave.=C2=A0 But you're probably all done by now=
. =C2=A0:-)</div>
<div><br>
</div>
<div>Rick</div>
<div><br>
<div dir=3D"ltr">Sent from my keyboard</div>
<div dir=3D"ltr"><br>
<blockquote type=3D"cite">On Apr 18, 2020, at 10:30 AM,
Linda Grunthaner via Spridgets <<a href=3D"mailto:spri=
dgets@autox.team.net" target=3D"_blank">spridgets@autox.team.net</a>>
wrote:<br>
<br>
</blockquote>
</div>
<blockquote type=3D"cite">
<div dir=3D"ltr">=EF=BB=BF
<div dir=3D"ltr">
<div dir=3D"ltr">
<div dir=3D"ltr">Hi Dave,
<div>Yes heavy heart every April RIP Frank.</div>
<div>I thought the cap needed the hole open to
breath and keep the fluid at proper
pressure/nopressure=C2=A0on the master cylinder.<=
/div>
<div><br>
</div>
<div>Will someone please explain?</div>
<div>Linda</div>
<div>62 California Sprite "Pinky"=C2=A0</=
div>
<div>(California because Pinky came from LA and
so did I)</div>
<div><br>
</div>
<div>PS found this fun video from 2015, enjoy.</div=
>
<div><br>
</div>
<div><a href=3D"https://www.youtube.com/watch?v=3DA=
zeIVufyRMA" target=3D"_blank">https://www.youtube.com/watch?v=3DAzeIVufyRMA=
</a><br>
</div>
<div><a href=3D"https://www.youtube.com/watch?v=3DA=
X8UEsHZzYo" target=3D"_blank">https://www.youtube.com/watch?v=3DAX8UEsHZzYo=
</a><br>
</div>
<div><br>
</div>
</div>
</div>
</div>
<br>
<div class=3D"gmail_quote">
<div dir=3D"ltr" class=3D"gmail_attr">On Mon, Apr 13,
2020 at 5:30 PM David Woerpel via Spridgets <<a hr=
ef=3D"mailto:spridgets@autox.team.net"; target=3D"_blank">spridgets@autox.te=
am.net</a>>
wrote:<br>
</div>
<blockquote class=3D"gmail_quote" style=3D"margin:0px 0=
px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Howdy
folks,<br>
<br>
Hope all is well with list members, that's you to=
o
Mark!=C2=A0 Assume people <br>
have been getting a lot of work done on their cars
during this period of <br>
"house arrest".=C2=A0 I'm finally getti=
ng around to
installing a remote <br>
clutch bleeder in the Bugeye.=C2=A0 Too many joints
creaking and complaining <br>
contorting myself into the footwell. Does the
cellophane under the M/C <br>
screw top work to prevent all the fluid draining
out of the M/C?=C2=A0 I <br>
forgot the slave is supplied by a hard line.<br>
<br>
Also, I pause today to remember our friend and
mentor, Frank. Still have <br>
(always will) the WWFD sticker on my car and tool
box. By extension we <br>
remember Paul A.; another mentor and guru in his
own right.=C2=A0 Miss you <br>
guys.=C2=A0 You taught us well.<br>
<br>
Stay safe, stay home and work on your cars and the
endless Honey Do list <br>
our wives keep dreaming up.=C2=A0 Be well friends.<br=
>
<br>
"Pay It Forward"<br>
<br>
"It only goes one way"<br>
<br>
Dave W<br>
'59 :{)<br>
'59 MGA 1550<br>
Burlington WI<br>
------------------------<br>
<br>
<br>
</blockquote>
</div>
</div>
</blockquote>
</div>
</div>
</blockquote>
</div>
<br clear=3D"all">
<div><br>
</div>
-- <br>
<div dir=3D"ltr">
<div dir=3D"ltr"><span style=3D"font-size:small">"Pay if forwa=
rd" in
honor of Frank Clarici III, Spritenut</span><br>
</div>
</div>
<br>
<fieldset></fieldset>
<pre>------------------------
<a href=3D"mailto:spridgets@autox.team.net"; target=3D"_blank">spridgets@aut=
ox.team.net</a>
//www.team.net/donate.html</a>
Archive: <a href=3D"http://www.team.net/pipermail/spridgets"; target=3D"_bla=
nk">http://www.team.net/pipermail/spridgets</a> <a href=3D"http://autox.te=
am.net/archive" target=3D"_blank">http://autox.team.net/archive</a>
ets/dwoerpel@wi.net" target=3D"_blank">http://autox.team.net/mailman/option=
s/spridgets/dwoerpel@wi.net</a>
</pre>
</blockquote>
</div>
------------------------<br>
<br>
<a href=3D"mailto:spridgets@autox.team.net"; target=3D"_blank">spridgets@aut=
ox.team.net</a><br>
<br>
et=3D"_blank">http://www.team.net/donate.html</a><br>
<br>
Archive: <a href=3D"http://www.team.net/pipermail/spridgets"; rel=3D"norefer=
rer" target=3D"_blank">http://www.team.net/pipermail/spridgets</a>=C2=A0 <a=
href=3D"http://autox.team.net/archive"; rel=3D"noreferrer" target=3D"_blank=
">http://autox.team.net/archive</a><br>
<br>
ets/pvanwig@mac.com" rel=3D"noreferrer" target=3D"_blank">http://autox.team=
.net/mailman/options/spridgets/pvanwig@mac.com</a><br>
</blockquote></div>
--000000000000bac00005a3acee72--
--===============7621328609435292496==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
------------------------
spridgets@autox.team.net
Archive: http://www.team.net/pipermail/spridgets http://autox.team.net/archive
--===============7621328609435292496==--
|