tigers
[Top] [All Lists]

Re: [Tigers] My project update and a few questions

To: Gyroplanes@aol.com
Subject: Re: [Tigers] My project update and a few questions
From: Steve Laifman <slaifman@socal.rr.com>
Date: Fri, 09 Jul 2010 12:33:03 -0700
Yes, Tom,

The shallow LAT valve covers can do this. 

I have heard of using two gaskets (maybe bonded to each other in the 
facing sides, to gain some clearance, as well as removing the standard 
metal plates.

No experience here, but "love will find a way!"

Steve

Steve Laifman

Editor

http://TigersUnited.com



Gyroplanes@aol.com wrote:
> Just wanted to give everyone an update. 
> I moved the replacement 302 engine into my shop and plan to remove the  
> intake within the next few days (the suspense is killing me) I need to find 
>out 
>  if I do indeed have a roller cam engine, so I can order a cam and kit.
>  
> I was considering a Ford racing B303 cam, but I have found the Edelbrock  
> cam (recommended for my manifold and heads) is considerably cheaper than the 
> FMS  unit and slightly bigger in lift and duration (I'm still worried about 
> the stock  rockers bumping my LAT Tiger aluminum covers though)
>  
> Tom  Milton
> Lansing, IL.
> 1964 Tiger  project
> B382000257
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>