TR6 Hardtop glass

["Frank & Carol Bandre" <bandrece@accessus.net>]

To the list:

Tha factory hardtop for my 76 TR6 is back from the trim shop with a new
headliner.  Now the job is to reinsert the glass.  Questions are:

1)  Should the galss be put in the rubber moulding then installed into the
top (removed this way), or rubber in first followed by the glass?

2)  What should be used as a sealant for the rubber/glass and rubber/metal
joints?

TIA.

Frank

'76 TR6
CF57005U
(Starting to get cold enough to make sure the top is ready for winter
driving)