triumphs
[Top] [All Lists]

Re: JUDGES question....TR-3A dash recovering and metal clips

To: "Andrew Mace" <amace@unix2.nysed.gov>, "David Moag" <moag@ix.netcom.com>
Subject: Re: JUDGES question....TR-3A dash recovering and metal clips
From: "Fred Thomas" <vafred@erols.com>
Date: Thu, 17 Feb 2000 14:27:08 -0500charset="iso-8859-1"
Cc: "Triumphs Mailing List" <triumphs@autox.team.net>
References: <Pine.WNT.3.95.1000217130637.-394893H-100000@win2431.nysed.gov>
The tube is attached to the fuel line with 3 alum. clips and adhesive tape,
2 at the top of the fuel line and 1 on the down slope, 3 coils of 1.5"
diameter approx. 2" below the start of the vertical run.   As per TRA
judging guide.  "FT"
----- Original Message -----
From: Andrew Mace <amace@unix2.nysed.gov>
To: David Moag <moag@ix.netcom.com>
Cc: Triumphs Mailing List <triumphs@autox.team.net>
Sent: Thursday, February 17, 2000 1:08 PM
Subject: RE: JUDGES question....TR-3A dash recovering and metal clips


>
> On Thu, 17 Feb 2000, David Moag wrote:
>
> > Ok Andy, you've got my interest. I'm not doing concours or anything, but
if
> > there is a correct number and orientation of the temp. gauge capillary
tube
> > then I might as well do it right. What is the magic answer???
>
> Sorry, I don't remember! :-( (I was not the TR3 expert on my team. I know
> them reasonably well, but not to that level of detail.) I suspect the TRA
> judging manual for the TR2/3 has that sort of information. T.R.
> Householder, am I correct?
>
> --Andy
>
> * * * * * * * * * * * * * * * * * * * * * * *
> * Andrew Mace, President and                *
> *   10/Herald/Vitesse (Sports 6) Consultant *
> * Vintage Triumph Register <www.vtr.org>    *
> * amace@unix2.nysed.gov                     *
> * * * * * * * * * * * * * * * * * * * * * * *
>
>


<Prev in Thread] Current Thread [Next in Thread>