ptegler@gouldfo.com wrote:
> Take a close look at the inner cable. You'll notice
> it's actually a spiral of small wire, just like the casing
> When rotating, it wants to screw itself down the length
> of the outer jacket.
OTOH -- when I put my TR3 back together after having it apart for about a year
the tach cable was not long enough. Same tach, drive & cable all worked fine
before.
Had to make a little square piece that I dropped into the dizzy drive to keep
the
cable from going in as far, otherwise there would not be enough to engage the
tach.
Geo Hahn
59 TR3A
Tucson
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|