Peter,
Thanks for letting us know you folks are willing to offer what we need vs.
what you have available!!
Regards,
Jim
Jim Bauder
'68 TR250 (finally at the body shop!)
Scottsdale, AZ
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of Arakelian, Peter
Sent: Tuesday, May 10, 2005 8:15 AM
To: triumphs@autox.team.net
Subject: Timing cover screws
<Does anyone have, or know of a source for the 5 slotted screws used
on the TR6 timing cover. They're 5/16 24 by 1/2" I believe. TRF
supplies hex head bolts and Moss supplies Phillips head screws. I know
its trivial, but just looking for originality. Thanks for any help.>
I want to thank the list for input on these screws for TR6 timing cover
attachment. We had been supplying functional screws, but not the
correct ones. Because of this thread, I have corrected our listing and
we will soon have in stock the correct pan head, slotted screws (3/8
length) and we currently do have stock of the correct fully threaded hex
bolt - we had been supplying a partially threaded bolt and a posi-drive
set screw.
If you let your suppliers know of these problems, we can sometimes fix
them...
Again thanks..
Peter Arakelian
Purchasing Agent
Moss Motors, Ltd.
(805) 679-7214
(805) 692-2510 Fax
arakelianp@mossmotors.com
Y
|