Did you clean and lube the cable's insides? Also, check how the cable is
routed to the tach. You want it to make as long & straight a connection as
possible to the tach's back. So you may have to re-route the cable to avoid
a bend at the connection.
Bob Danielson
1975 TR6
http://tr6.danielsonfamily.org
-----Original Message-----
From: owner-triumphs@autox.team.net [mailto:owner-triumphs@autox.team.net]
On Behalf Of chuck easton
Sent: Saturday, July 02, 2005 1:13 AM
To: triumphs@autox.team.net
Subject: tachometer
Hey fellow listers
Does any one know how to calibrate a TR6 tachometer?
I recently had one rebuilt and now it reads low, like 1700 RPM at 50 mph in
4th gear when it should read 2500!
Chuck Easton
71 TR6
Campbell River
British Columbia
|