triumphs
[Top] [All Lists]

Re: [TR] Fwd: TR: suggestions for refinishing exhaust manifold

To: Randall <tr3driver@ca.rr.com>, "triumphs@autox.team.net"
Subject: Re: [TR] Fwd: TR: suggestions for refinishing exhaust manifold
From: John Mitchell <jmitch@snet.net>
Date: Wed, 07 Feb 2007 20:56:22 -0500
Gives us originality freaks something to do during the winter:)     John

Randall wrote:
>> Hi Greg, If you go with zinc plating, originally it was 
>> yellow(chromate) zinc.
>>     
>
> Isn't zinc going to discolor almost instantly, once the engine is driven ?
> It's only rated to 250F, and the manifold will be a lot hotter than that.
>
> I bought an 80 Chevy new with a similar setup, and it was already discolored
> the first time I opened the hood.
>
> Randall
>
>
> CONFIDENTIALITY. This electronic mail and any files transmitted with it may 
>contain information proprietary to NavCom Technology, Inc., or one of its 
>affiliates, and are intended solely for the use of the individual or entity to 
>whom they are addressed, shall be maintained in confidence and not disclosed 
>to third parties without the written consent of the sender. If you are not the 
>intended recipient or the person responsible for delivering the electronic 
>mail to the intended recipient, be advised that you have received this 
>electronic mail in error and that any use, dissemination, forwarding, 
>printing, or copying of this electronic mail is strictly prohibited. If you 
>have received this electronic mail in 


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org



<Prev in Thread] Current Thread [Next in Thread>