Reminds me of my own life, I used to say, "someday, when I am older, and have
more time and money" but the only variable in the equation that is consistently
progressing is the first one.
---- Andrew Uprichard <auprichard@uprichard.net> wrote:
> Ah - the old "when I get time".....
>
> Let me know when you work out where to find it...... :-)
>
> Andrew
>
> -----Original Message-----
> From: Triumphs [mailto:triumphs-bounces@autox.team.net] On Behalf Of Randall
> Sent: Monday, November 02, 2015 9:42 PM
> To: 'Truiumphs'
> Subject: Re: [TR] Vibration at Speed
>
> > Before I start pulling the driveline apart I thought I see If
> > anyone has had a similar problem of a suggestion of where to go next.
> > I'd appreciate the input.
>
> The new rotors I picked up at VTR some years ago (OK, a lot of years ago)
> turned out to be out of balance. I tried drilling holes to balance them,
> without much success; then finally bought another new pair. The new ones
> are still not perfect, but much better than the old ones. I also found a
> front hub that didn't run true and skimmed the face. Still some small
> vibration, but it's much better than it was.
>
> When I find time, I plan to use an old on-car wheel balancer (so the hubs,
> rotors & drums all get balanced with the tires & wheels) and see what that
> does.
>
> -- Randall
>
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net
>
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/glemon@neb.rr.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|