I generally replace wiring harnesses. Don't find many in good shape. I order
them directly
from the UK. I use www.autosparks.co.uk Delivery is usually fast and not that
expensive.
They have a good web site and order directly from it. I always use new bullit
connectors and sleeves
with dielectric grease.
Dean
Dean Tetterton
tr3a58 at verizon.net
-----Original Message-----
From: Stan Foster <stan at redtr6.com>
To: 'Triumphs List' <triumphs at autox.team.net>; David Templeton <davidt at
opentext.com>
Sent: Mon, Aug 20, 2018 12:56 pm
Subject: Re: [TR] to loom or not to loom...
For my TR3 the fabric on the old loom had mostly rotted away and it was a mess
with many bits of wire spliced in. The actual wire was oxidized even inside the
plastic insulation so doing anything with it was a pita. I opted to replace it
with a new loom and it was money well spent.
Stan
From: Triumphs <triumphs-bounces at autox.team.net> on behalf of David
Templeton <davidt at opentext.com>
Sent: Monday, August 20, 2018 9:26:16 AM
To: 'Triumphs List'
Subject: [TR] to loom or not to loom...
Ok so the other project, besides getting the ?3 going is the body replacement
on the spsitsix. I have started to move over, and refurbish, components. I am
looking at the wiring harness and I am wondering, should I pull and reuse the
old one OR put out the cash and get a new harness? Generalized thoughts?
Opinions? Experiences? Suppliers?
Regards
David
** triumphs at autox.team.net **
Archive: http://www.team.net/archive
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/triumphs/attachments/20180820/d206dd43/attachment.html>
|