30 weight on the oil for the dash pots. Iâ??m going to check the richness one
flat at a time and see if that helps. Iâ??m sure itâ??s in the tuning. Thanks,
Jim
Sent from my iPhone
> On Nov 4, 2018, at 10:09 PM, Michael Marr <mmarr@albiontechnical.com> wrote:
>
> What kind of oil are you using in the dash pots? If the oil is too heavy, it
> may overdamp the pistons, causing them to rise too slowly and momentarily
> weaken the mixture, causing the hesitation. I find 3 in 1 is about the right
> weight.
>
> Mike
>
> Sent from my iPhone
>
>> On Nov 4, 2018, at 21:05, Jim Henningsen <trguy75@gmail.com> wrote:
>>
>> I have finished rebuilding the carbs, new carb linkage etc. Unfortunately
>> after all this tuning the carbs hesitate at first push of the pedal. They
>> kind of go huhh then rev the engine. It's a hesitation. Seems to be
>> better with choke on. The choke cable is hard to pull out. Takes two ands
>> to pull out and then twist to lock. That's to really get the choke levers
>> to move both jets down. Is this normal or maybe I need a new choke cable.
>> I think the resistance is in the mechanism engineering. Any thoughts on
>> aither issue. Hard choke pull or hesitation.
>> Thanks
>> Jim Henningsen (aka still learning the 3)
>> Ocala, FL
>> 61 TR3A
>> 62 TR4
>> 75 TR6
>> 82 Jeep CJ8
>> 02 Triumph Trophy 1200
>>
>> ** triumphs@autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/mmarr@albiontechnical.com
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|