mgs
[Top] [All Lists]

Re: leaf spring sag

To: dedwards@magnus.acs.ohio-state.edu, mgs@autox.team.net
Subject: Re: leaf spring sag
From: Johnmowog@aol.com
Date: Thu, 25 May 1995 02:19:38 -0400
jackstands will do it, just get lots of wd40 in the bolts first. I would
remove the rear shackles  first, supporting the spring end carefully with a
jack (no compression, just good support) and then work forward from there to
the ubolts and front bolts, which are usually the hardest to remove.  With a
little muscle and good support, definately a do-it-yourself job

<Prev in Thread] Current Thread [Next in Thread>