mgs
[Top] [All Lists]

Re: Brake light switches AND fluid problems

To: Ajhsys@aol.com
Subject: Re: Brake light switches AND fluid problems
From: "James H. Nazarian, Ph.D." <microdoc@apk.net>
Date: Wed, 23 Feb 2000 20:21:59 -0500
Hi Allen,

The brake fluid / paint remover will be easy to remove. being so very 
hydrophilic
as it is; it will gladly be washed away with warm soapy water, leaving behind 
(no
pun intended) the eternally beautiful naked sheet metal, awaiting the ravaging
rust worm.

Jim

Ajhsys@aol.com wrote:

> In a message dated 2/23/00 12:35:04 PM Eastern Standard Time,
> microdoc@apk.net writes:
>
> << Knowing that all LBC fans are environmentally aware prompts me to share a
>  recycling tip: save all the old DOT 3 & 4 brake and clutch fluid from your
> annual
>  or semi-annual fluid purges. When the time comes to repaint your car you can
> drag
>  out your barrels of old fluid and use it as paint remover. Not only does it
> work
>  better, but you will save all the money you would have spend on Aero
> stripper. It
>  is very beneficial to your health that you won't be inhaling all those nasty
>  carcinogenic aromatic hydrocarbons and solvents. >>
>
> - - - - - - - - - - - - - - -
>
> I hope that was tongue-in-cheek.  Brake fluid isn't volatile enough to be a
> good paint remover.  After you remove the paint (which it does very well) you
> have to then remove the brake fluid, which won't evaporate.
>
> To chemically remove paint, buy a good respirator and some airplane stripper.
>
> Allen Hefner
> SCCA Philly Region Rally Steward
> '77 Midget
> '92 Mitsubishi Expo LRV Sport


<Prev in Thread] Current Thread [Next in Thread>