I jack under the centre of the front cross-member if I want to lift the
whole front or the spring pans if I just want to raise one wheel. When
under the cross-member I make sure the rear tongue of the jack pad is
located behind the rear edge of the cross-member to prevent slippage,
because of the angle changes as the cross-member rises.
----- Original Message -----
From: "Don Malling" <firstname.lastname@example.org>
To: "Telewest (PH)" <email@example.com>
Cc: "Tim Holt" <firstname.lastname@example.org>; <email@example.com>
Sent: Wednesday, October 23, 2002 12:49 PM
Subject: Re: I don't know jack(ing)
> Where is a good place to jack the front on an MGB (with sill problems).
> I plan to put the jack stands under the rear axle, but not so sure on
> the front. Jack on the front cross member? Put some wood under the
> wishbone arms and jack there?
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive