I drive the front wheels on to a pair of 1" thick boards. The extra inch
allows my floor/trolley jack to get under the cross member. (A 45 deg bevel
on the boards makes it easier to drive up.)
Bob Donahue (Still stuck in the '50s)
Email - bobmgtd@insightbb.com
52 MGTD - NEMGTR #11470
71 MGB - NAMGBR #7-3336
.
----- Original Message -----
From: "Dodd, Kelvin" <doddk@mossmotors.com>
To: "'Don Malling'" <dmallin@attglobal.net>; <mgs@autox.team.net>
Sent: Wednesday, October 23, 2002 6:15 PM
Subject: RE: I don't know jack(ing)
>
> I've not run into any deformation of lower spring pans from jacking, so on
a
> stock ride height car I believe that is a safe place. I am in the same
boat
> tho' with 185/60 tires there is no way to get the jack in.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|