In a message dated 12/13/1999 11:58:47 PM Mountain Standard Time,
Bkitterer@aol.com writes:
> In a message dated 12/13/99 6:22:47 AM, JustBrits writes:
>
> <<
> << The backing for the quarter
> panels are a cardboard and we have been replacing those with door skin.
> >>
>
> Huh?? >>
>
> The vinyl on the interior panels is mounted on a cardboard material. If
you
>
> are doing your own upholstery then you can get wood door skin's from
lumber
> yards. These are 1/16 to 1/8 inch thick and come in standard door sizes.
> They are normally used for re-facing wooden doors. Take the cardboard
> panels and use them as a templets to mark and cut the door skins. We like
> the door skins because they do not bend as easy, 1/8 inch staples hold
well
> and it is easier to apply contact cement to hold the fabrics in place.
>
> Bob and Annice
> 1960 Sprite (Mk IV in disguise)
> 1966 Sprite Mk III (Trevor) in progress
>
So if Frank does this on the A40 for all four doors he will effectively have
restored the four skins? Dr. Frank, we'd all be proud!
Robert Houston...whatta ya mean I can't do my own appendectomy????
|