"Peter C." wrote:
> Oh most knowledgeable ones,
> An "acquaintance" with literally stacks of 948 cranks and axles is
> what are the casting/forging numbers on the most desirable crankshafts and
> axle shafts. These must be the numbers found on the pieces themselves.
> Please, check your cranks.
> Thanks Peter C
For the axles, EN17 BTA is the harder ones.
For cranks, I don't think there any choices on 948s but I could be
EN40B is the hardened 1275 crank it has cross drilled oil holes for easy
Toms River, NJ
The bug in the rice bowl