Forgot to add unmodified carrier tube also.....
> New Datsun release bearing, unmodified carrier, plus spacer provided by
> Paul.
>
> I agree it seems to be hanging on the carrier.
>
> ----- Original Message -----
> From: "Bryan Vandiver" <Bryan.Vandiver@eng.sun.com>
> To: <spridgets@autox.team.net>; <millerls@ado13.com>
> Sent: Friday, August 18, 2000 9:47 AM
> Subject: Re: Clutch
>
>
> > Larry,
> >
> > Sounds like the TO carrier is hanging up on the carrier tube. When you
> redid
> > your clutch, did you get the TO spacer from Paul A, and install that
> behind the
> > TO bearing?? Did you replace the TO carrier with a stock one, or are you
> still
> > using the modified one from Rivergate?
> >
> > - Bryan
> >
> > >X-Authentication-Warning: teamfat2.dsl.aros.net: majordom set sender to
> > owner-spridgets@Autox.Team.Net using -f
> > >To: "Spridgets" <spridgets@autox.team.net>
> > >Subject: Clutch
> > >MIME-Version: 1.0 charset="iso-8859-1"
> > >X-Priority: 3
> > >X-MSMail-Priority: Normal
> > >X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600
> > >
> > >On the way to work this morning I had some clutch trouble in the
Bugeye.
> > >
> > >When depressed for shifting, the pedal would hang when I let it up. It
> would
> > >stick for a second or two, then slowly come up. I don't think it was
> > >catching on anything on the floor.
> > >
> > >It never did it taking off in 1st, only when shifting and it did not do
> it
> > >every time. Sitting at a light, I pressed and released it numerous
times
> and
> > >it was ok. This was of course with the tranny in neutral.
> > >
> > >I have the Datsun 5-speed using the Datsun clutch and pressure plate
and
> a
> > >Bugeye slave cylinder with the adjustable rod.
> > >
> > >Any ideas?
> > >
> > >Larry Miller
> > >'59 Bugeye
> > >http://www.ado13.com
> > >
> >
> >
>
|