I/we pulled the engine and trans from my 74 and the transmission sat vertical
for about a month on the bell housing.
Prior to this I had no problems shifting at all. Now when we put the engine and
new clutch back we had to hobble together a pilot bushing since the one hat was
in their was in pieces and the one that came with the new clutch did not fit.
anyway now i have occasional problems getting into first and today getting into
reverse. This is with the clutch pedal fully pressed down. Now this isn't gear
grinding on gear, it is as if something is blocking the stick shift from moving
forward into gear. The stick shift isn't moving forward enough to engage the
gears . It eventually gets in but takes a few tries.
i at first thought it might be air in the line but after bleeding it twice and
still having the same issue I am wondering if its something else.
any ideas? could i have but something back together wrong or is this just a
byproduct of new clutch and cobbled pilot bushing?
Ryan
'74 midget
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|