6pack
[Top] [All Lists]

RE: TRF magic clutch kit

To: "'Jim Swarthout'" <jswarth1@tampabay.rr.com>, 6pack@autox.team.net
Subject: RE: TRF magic clutch kit
From: Mark Hooper <mhooper@pixelsystems.com>
Date: Thu, 19 Dec 2002 15:51:05 -0500
Jim:

Clutches! That touches a sensitive point. Who hasn't spent a session or two
anxiously lying on their back peering at the underside of the car wondering
how they were going to get home. And then to realise that they would have to
practically disassemble the car to fix this $30 part. 

<rant mode on>

I would say that the entire dry clutch design was not the automotive
industry's "finest hour". It comes from the dawn of time when parts were
expensive and everybody either had a chauffeur (1%)or did it
themselves(99%). Paying a mechanic at madison avenue lawyer rates is a
recent innovation that has forced manufacturers to develop disposable cars
that work perfectly for a while under warranty but then must be scrapped
because they cost more to fix than to replace. It was once very common to
reline your own clutch friction plates. Now the mechanic fees make such a
course unthinkable. You replace the entire mechanism just in case since it
would cost the entire amount again if the first attempt failed to fix the
problem. 

It is absolutely outrageous that in 2002 we are using this 120-year old
idiocy. And in case anyone feels that it is a period design that shouldn't
have been updated, most motorcyles of the time had the "wet packed disc"
setup that allows the clutch to be removed and reinstalled in 30 minutes,
with most of the time spent cleaning the crankcase up all without ever
touching a hair on the installation or connection of the transmission or
engine. Almost any number of designs were doable with a wet clutch and were
commonly deployed in other machines. It is only the desire to save $2 at the
expense of the motorist that has kept this anachronistic abomination on the
road to this day. A wet clutch is smoother, simple to repair and doesn't
smell or rust shut have worn through finger springs. 

It seems that even today, the car manufacturers aren't interested in fixing
the design. The newest cars are not much changed in this area from their
ancestors of 4 generations past. Better materials applied to a concept that
was old before it ever saw the light of day in the 1800s. 

<rant mode off>

Mark


-----Original Message-----
From: Jim Swarthout [mailto:jswarth1@tampabay.rr.com]
Sent: Wednesday, December 18, 2002 11:42 PM
To: 6pack@autox.team.net
Subject: RE: TRF magic clutch kit


To the list,

Please forgive my ignorance!

Until my recent purchase...I had not owned a TR-6 for over 10 years.

I closed my shop 12 years ago.

I never had any problems with release bearings!

I changed many clutches for customers...and not one came back!

Nothing could be simpler, (by design), than a clutch release bearing!

If this is truly a problem, then I would suggest we all attempt to find
out why!

This must be an obvious blunder on the part of the manufacturer!

Considering the amount of labor that is required to change the release
bearing, I would have been highly irritated at having to repeatedly
replace release bearings for good customers.

Answers to these questions are never a mystery...there must be an
obvious reason why these bearings are failing.

Jim Swarthout

<Prev in Thread] Current Thread [Next in Thread>