[Top] [All Lists]

Re: Re[4]: MGB Heater Removal

Subject: Re: Re[4]: MGB Heater Removal
From: Lane Rollins <>
Date: Wed, 11 Dec 1996 09:12:23 -0800
>And don't forget to cut a little foam to fit the core nipples coming out
>of the
>heater box.

I found some grommets at a local hardware store that worked great. Well I
should say they matched the orginals. The inlet/outlet pipes were not
centered in the holes on the heater box, so it was a real bear to install.


<Prev in Thread] Current Thread [Next in Thread>