[Top] [All Lists]

Re: [oletrucks] electrical harness

To: Tom3600@webtv.net, Sam.Barrette@mail.oasd.k12.wi.us (Sam Barrette)
Subject: Re: [oletrucks] electrical harness
From: Bill Bailey <billb@gamewood.net>
Date: Mon, 26 Mar 2001 17:44:17 -0500
I recently put one of the E-Z Wiring kits in a friends F100. It went in
very easy. The hardest part of the whole thing was figuring out where he
wanted the fusebox.
I personally liked the fact that all the wires are one color (black). I
think it makes for a neat appearing installation. 
The price was right too!

At 03:41 PM 03/26/2001 -0500, Tom3600@webtv.net wrote:
>Sam ~
>I used a relatively low cost ($185.00) 18 fuse / 21 circuits E-Z Wiring
>Kit from Flip's Hot Rod & Antique Parts 352-854-8320.  It has a
>pre-wired fuse box and the wires are labeled every 5 inches and comes
>with instructions.  I did not need a lot of the circuits like power
>windows, seats, A.C. etc. but I did use the alternator, elec. fan,
>radio, Tach. etc.  You can just eliminate the wires you don't need
>before you start or leave them in the harness for future use.
>Chevy Duty has one for about $100.00 but I don't think it has any extra
>circuits or fuse box.
>Tom Poterack
>Moline, IL.
>'49 Chevy Pickup Retro Rod
>Received: from smtpin-102-3.bryant.webtv.net ( by
>  storefull-248.iap.bryant.webtv.net with WTV-SMTP; Mon, 26 Mar 2001
>  12:19:08 -0800 (PST)
>Received: by smtpin-102-3.bryant.webtv.net (WebTV_Postfix+sws) id
>  9F732140; Mon, 26 Mar 2001 12:19:11 -0800 (PST)
>Delivered-To: tom3600@webtv.net
>Received: from teamfat2.dsl.aros.net (teamfat2.dsl.aros.net
>  []) by smtpin-102-3.bryant.webtv.net (WebTV_Postfix+sws)
>  with ESMTP id 5FCC8166; Mon, 26 Mar 2001 12:19:10 -0800 (PST)
>Received: (from majordom@localhost) by teamfat2.dsl.aros.net
>  (8.11.0/8.11.0) id f2QK8jS19814 for oletrucks-actors; Mon, 26 Mar 2001
>  13:08:45 -0700 (MST)
>Message-Id: <sabf479c.054@mail.oasd.k12.wi.us>
>X-Mailer: Novell GroupWise 5.5
>Date: Mon, 26 Mar 2001 13:43:27 -0600
>From: "Sam Barrette" <Sam.Barrette@mail.oasd.k12.wi.us>
>To: <oletrucks@autox.team.net>
>Subject: [oletrucks] electrical harness
>Sender: owner-oletrucks@autox.team.net
>Precedence: bulk
>Reply-To: "Sam Barrette" <Sam.Barrette@mail.oasd.k12.wi.us>
>The wiring on my 50 3100 is mostly original and a mess.  Blinkers, horn
>gas gauge, gauge lights etc don't work.  Therefore I think I'm best off
>to replace the whole harness.  However I'd also need to include  the CB
>and stereo etc.  I wouldn't mind having a fuse box to run some of these
>items through.
>My understanding is that some of the harnesses are better quality than
>Does anyone have a name brand harness that they would recommend, and
>where did you get it from?  Does it come with good instructions?
>Thanks, Sam  1950 3100
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
Bill Bailey
57 Chevy 3100
Danville, Virginia
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>