Weight is about 60 lbs if my arms have been calibrated to spec recently.
Patrick Bowen
-----Original Message-----
From: alemen@pop.ftconnect.com [mailto:alemen@pop.ftconnect.com]
Sent: Monday, April 03, 2000 1:40 PM
To: frank@zk3.dec.com; alemen@ftconnect.com; spitfires@autox.team.net
Subject: Re: Re: clutch
Douglas, I also have tried teh push rod when teh slave was out and it moves
all so easily and then stopped. Just as if it was not connected. So I
suspect the release mechanism somewhere. I am prepared to pull the
transmission as I don't see any alternative. Any idea what the transmission
with O/D and bellhousing etc. weighs?
Alan
Original Message:
-----------------
From: Douglas Frank frank@zk3.dec.com
Date: Mon, 03 Apr 2000 13:24:01 -0400
Subject: Re: clutch
Alan Lemen wrote:
>
> When I was replacing the carpet, I bled the clutch leading to total dead
> clutch pedal and no disengagement.
> So rebuilt master and slave cylinders and re-bled whole system. More
> pedal resistance but still not enough to get the clutch disengaging.
..
> Bought new slave and installed. re-bled and still no joy!
Alan, it's not clear whether you think you're getting the full range of
motion from the slave pushrod. It may be that the problem is inside the
bell housing instead.
--
Douglas Frank Compaq Computer Corp. Friendship, n.
ZKO 110 Spit Brook Rd. A ship big enough to carry two in
603-884-0501 Nashua, NH USA 03062 fair weather, but only one in
foul.
-------------------------------------------------------------------
This message has been posted from Mail2Web http://www.mail2web.com/
Web Hosting for $9.95 per month! Visit: http://www.yourhosting.com/
-------------------------------------------------------------------
|