spitfires
[Top] [All Lists]

re: Replacing rear valance?

To: "Jeff McNeal" <jmcneal@ohms.com>, <spitfires@autox.team.net>
Subject: re: Replacing rear valance?
From: rtgetzinger@scif.com
Date: Mon, 3 Jul 2000 9:05:31 PDT
Jeff,
Man you gotta do a lot of work on your car, so it seems. Just an observation 
and non-spit specific comment. I read about buying Spitfires and how you 
should find the car in the best shape and then take it from there. Sounds 
like your '67, a fine example from the shots. I, taking a different route, 
found the least expensive example I could. My '74 cost $75, to purchase. Btw, 
my other rig is also a Ford, a '77 1/2 ton p/u with 179K original miles, 
whatever. I work on my spit seemingly as much as you. Rebuilt the engine, 
brakes, etc. and new primer (paint soon). My investment is still under a 
grand but will likely double with paint and new rubber, interior, etc. My 
time invested, ouch! But, when I am done I will know this car, measurable 
with a micrometer. My point is this, which is the better way. Purchase 
done(?) as yours was? or build from the ground up? Even if I had the $ I 
prefer to know my car intricately and if there is something wrong it is 
because of me and not someone I paid for a complete done car.
To answer your question, do it yourself, almost always, if you know what 
you're doing.

Rob 
Redding, far Northern CA, where there's no traffic, endless mountain roads, 
and warm nights. One Spitfire haven. 
---------- Original Text ----------

From: "Jeff McNeal" <jmcneal@ohms.com>, on 07/02/2000 1:11 PM:


Happy holiday weekend, all.  I grew rather ambitious today and washed and
waxed both my Spitfire and Expedition.  I'll wipe the dried wax off Mrs.
Jones in a bit, but I'm going to have my 16-year old son buff the
Expedition.  That kid needs to learn some work ethics and besides, I've
already done the tough part!  Anyway, I digress.  As I was waxing the rear
valance on Mrs. J., the light pressure of my fingertip caused some paint to
crack.  The rear valance is 33 years original and the cars' history of
English and Chicago weather have caught up in a few spots.  The rear valance
is by far the worst piece on the entire car with an actual rust through spot
down below where it's deftly concealed from public scrutiny.

Here's the question:  Is the rear valance the easiest body panel to replace,
or what?  It certainly LOOKS like I could do it myself.  What's the
easiest/best way?  Take a Sawsall to it and cut as close to the side and
bottom seams as I can?  Then take a die grinder, spot weld remover and pry
bar and have at the remaining sheetmetal until I'm down to the lips of the
rear wings?  Then fit the new piece, TEMPORARILY steel pop rivet in place
(to hold it in position), then a few taps from a MIG welder, or what?  The
longer I own this car and the more projects I complete, the more emboldened
I'm becoming to start whacking away at the cancer myself, then take it to
the pros for the finishing touches and painting.  What say you?

Best wishes,

Jeff in San Diego

'67 RHD Spitfire Mk3 aka "Mrs. Jones"
Jeff's Classic '67 Spitfire Mk3 site & Vintage Spitfire Webring
http://www.ohms.com/spitfire/spitfire.shtml
home of the NEW Totally Triumph Auction
"By Triumph enthusiasts, for Triumph enthusiasts"
http://www.ohms.com/cgi-bin/TRauction.cgi
and... The Triumph Autos/Parts Wanted Listings
http://www.ohms.com/cgi-bin/TRwanted.cgi
...plus a few other surprises!

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *




<Prev in Thread] Current Thread [Next in Thread>