spridgets
[Top] [All Lists]

Re: rear seal

To: CONAN@RALVM8.VNET.IBM.COM, spridgets@autox.team.net
Subject: Re: rear seal
From: Lancer7676@aol.com
Date: Fri, 19 Feb 1999 22:24:46 EST
Reply-to: Lancer7676@aol.com
Sender: owner-spridgets@autox.team.net
In a message dated 2/19/99 8:51:38 PM Eastern Standard Time,
CONAN@RALVM8.VNET.IBM.COM writes:

<< On the 1275 there is a metal housing/bracket/doodad bolted to the rear
 plate at the crankshaft that IS or holds the rear crank seal. >>

Good suggestion Ed.  I have heard to not replace it with one from another
engine or a new one without line boring.  Have not heard that you couldnt
remove and replace the original--maybe not.  But Robert, if you have replaced
this piece it may not be sealing there.

--David

<Prev in Thread] Current Thread [Next in Thread>