When you send your shocks & stuff to Peter C. ask him for the SKF wheel
bearings. I replaced my Mo$$ quality bearings (fell apart in my hands)
last month with the SKF bearings supplied by Peter - major difference in
quality! Cost was about the same. Thanks, Peter!
Keep looking on Ebay for the drilled A-arms. I bought a good used pair
(cleaned, powder coated) last year for about $75.
San Juan Capistrano, CA
Hal Faulkner wrote:
>Need to send the calipers and shocks to PPP for rebuilding. Spend more money
>on wheel bearings. Well
>I'm going to have it apart, I might as well.... I have Noltec bushings,
>stainless brake hoses, etc. I have an anti-sway bar (cost more on eBay than
>it is worth....,) but my A-arms aren't drilled or reinforced. New A-arms
>cost about $150 each but I am loathe to drill my original ones. Anybody got